Product grade: General grade, Toughen resistant grade Product Feature: High toughness, Excellent anti-creep and fatigue resistance, Low warpage, High impact strength, Light texture

What is carbon fiber PLA? Carbon fiber reinforced PLA is an excellent material, strong, lightweight, with excellent layer bonding and low warpage. It has excellent layer adhesion and low warpage. Carbon fiber filaments are not as strong" as other 3D materials, but are much stiffer. The increased rigidity of carbon fiber means increased structural support, but reduced overall flexibility. It is slightly more brittle than regular PLA.  Carbon PLA Specifications Flexural strength: 57 MPa Melting temperature: 190°C- 230°C Tensile strength: 45.5 MPa . Elongation at break: (73°F) 320% Standard tolerance: 0.05mm Layer thickness: 3mm Shore hardness: 45D Density: 1.3 g/cm3 (1300 kg/m3) Heat distortion: 21% to 85°C Shrinkage: very low when cooled to higher ambient temperatures Characteristics Moderate strain at break (8-10%), so the filaments are not very brittle, but very tough Very high melt strength and viscosity Good dimensional accuracy and stability Easy handling on many platforms Highly attractive matte black surface Excellent impact resistance and lightness Applications of carbon fiber PL A material Carbon PLA is the ideal material for frames, supports, housings, propellers, chemical instruments, etc. It is also particularly preferred by drone manufacturers and RC enthusiasts. Ideal for applications requiring maximum stiffness and strength. Other products you may wonder                      PA6-LCF                                    PP-LCF                                   PEEK-LCF About Long carbon fiber Long carbon fiber reinforced composites offer siginifacant weight savings and provide optimum strength and stiffness properties in reinforced thermoplastics. The excellent machanical properties of long carbon fiber reinforced composites make it an ideal replacement for metals. Combined with the design and manufacturing advantages of injection molded thermoplastics, long carbon fiber composites simplify the re-imagining of components and equipment with demanding performance requirements. Its widespread use in aerospace and other advanced industries makes it a "high-tech" perception of consumers - you can use it to market products and create differentiation from competitors. About us Xiamen LFT composite plastic Co., Ltd is a brand-name company that focuses on LFT&LFRT. Long Glass Fiber Series (LGF) & Long Carbon Fiber Series (LCF). The company's thermoplastic LFT can be used for LFT-G injection molding and extrusion, and can also be used for LFT-D molding. It can be produced according to customer requirements: 5~25mm in length. The company's continuous infiltration reinforced thermoplastics have passed ISO9001&16949 system certification,  and the products have obtained lots of national trademarks and patents. We can offer you: 1. LFT & LFRT material technical parameters and leading edge design. 2. Mold front design and recommendations. 3. Provide technical support such as injection molding and extrusion molding.

PP long glass fiber reinforced composites offer excellent mechanical properties, including high tensile strength, impact resistance, and dimensional stability, making them ideal for demanding applications. These materials are widely used in the automotive, home appliance, and industrial sectors, where durability and performance are critical. With glass fiber content ranging from 20% to 60%, they provide a balance between strength and weight reduction, enhancing the overall efficiency of the final product.

Homopolymer PP long carbon fiber composites offer excellent mechanical properties, including high strength, rigidity, and impact resistance. These materials are ideal for high-performance applications in automotive, aerospace, and industrial sectors, where lightweight yet durable solutions are essential. With superior dimensional stability and thermal resistance, homopolymer PP long carbon fiber composites provide a reliable alternative to metals in demanding environments.

Glass-filled Nylon, or PA6-GF, employs PA6 (polyamide 6) as the basic compounds. Polycaprolactam (PA6) is another name for Nylon 6 or PA6. PA6-GF performs well at low temperatures and has strong toughness and impact resistance. It also has high dimensional stability and moisture absorption. Glass fiber content in PA6 GF range from 20% to 60%. Strength and rigidity increase with increasing glass fiber content, while toughness and impact resistance decrease.

PA6 long carbon fiber composites offer exceptional strength, stiffness, and low weight, making them ideal for high-performance applications in industries like automotive, aerospace, and electronics. These materials provide superior mechanical properties, including high tensile strength and excellent fatigue resistance, while also ensuring enhanced dimensional stability under extreme conditions. PA6 long carbon fiber composites are a reliable solution for replacing metals in demanding, lightweight structural components.

The mechanical properties of long glass fiber reinforced nylon 66 (LGFR-PA66) are obviously better than those of short glass fiber reinforced nylon 66 (SGFR-PA66), and the molding processing performance is also better. It can be molded by various molding methods such as injection molding and compression molding, and complex components can also be formed.

PA66-CF40 is a 40% long carbon fiber-reinforced PA 66, offering exceptional strength, creep resistance, rigidity, and dimensional stability. After modification, PA66-CF40 exhibits outstanding mechanical properties, making it highly resilient and ideal for high-load applications in extreme temperature environments. This material is particularly suitable for components that require high strength and durability over extended periods, such as covers and structural parts in machines and vehicles.

PA 12 (also known as Nylon 12) is a good general-use plastic with broad additive applications and is known for its toughness, tensile strength, impact strength and ability to flex without fracture. PA 12 has long been used by injection molders due to these mechanical properties. If you’re considering converting metal parts to plastic, PA12 will be a good choice.

PA12 long carbon fiber reinforced material combines the excellent properties of polyamide 12 with the strength and stiffness of long carbon fibers. This high-performance composite offers superior mechanical strength, impact resistance, and dimensional stability, making it ideal for demanding applications in automotive, aerospace, and industrial sectors.