Carbon Fiber Reinforced Composite (CFRP) Carbon fiber is just a fiber that cannot be used to make parts. Therefore, carbon fiber should be used together with resin to make composite materials. Carbon fiber nylon, a type of conductive nylon, is a carbon fiber added to a nylon base. The material incorporates high-rigidity carbon fibers based on the properties of nylon, giving the material a higher m...

A few days ago, from June 1, the whole country will carry out the "One Helmet and One Belt" security guard operation. A helmet-with a helmet A belt-with a seat belt. The purpose is to enhance the safety consciousness of motorcycle and electric bicycle riders wearing safety helmets, and the safety of automobile drivers and passengers, and to reduce traffic accident damage and mortality. Therefore, ...

Lft-long fiber PA66 reinforced modified nylon automotive lightweight material high wear resistance PA66 material Product model: PA66-Na-LGF Processing level: injection molding level Advantages: 1. High toughness; 2. Low warping; 3. Resistance to fatigue, high temperature and aging Packing: 25 kg/BAG Application: it can be used in the manufacture of mechanical, automobile, chemical, electrical and ...

In the face of high load and impact stress at high temperature and conductions,common short glass fiber materials are often unable to match,in this case,the polymer began to soften or brittle,long glass fiber reinforced thermoplastic polymer came into being. The product process of long glass fiber modified Pa66 materials is not complicated,and there are many material manufacturers on the market ca...

Long Fiber (Xiamen) New Material Technology Co., Ltd. was established in 2009, the main business: abbreviated as LFT-G, LFRT, series of long glass fiber (LGF) and long carbon fiber ( LCF) development and production of PP, PA6, PA66, PPA, PA12, TPU, PBT, PLA, PET, PPS, PEEK, and other engineering plastics LFT long fiber reinforced grades, LFT plastics, injection molding materials, LFT particles, LF...

The fiber size of SFT composite material is short (1~3 mm). After the screw plasticizing and injection molding of the injection molding machine, the fiber length in the product will be further shortened (0.2~0.5 mm), the fiber retention length will be less than 0.3 mm, the size will be less than the critical length of the size, so SGF can not play a strengthening role. The fibers in the LFT compos...

Modified plastics have become a consumer trend, and behind this trend are the following five factors: 1. High performance: Long fiber enhance Modified plastics not only have the advantages of traditional plastics, such as low density and corrosion resistance, but also have improved physical and mechanical properties, such as high strength, high toughness, high impact resistance, wear resistance an...

TPU is usually medium to generally transparent, and some are milky white or turbid. Polyether TPU after adding long glass fiber is much more transparent than polyester TPU. Through the thermal analysis of TPU grades, its performance in various applications can be measured. TPU relies on heat to obtain new shapes during extrusion and injection molding. Since multifunctional TPUs need to be heated r...

PP modification methods are generally divided into chemical and physical modification: Chemical modification is cross-linking and grafting on molecular chain.Physical modification is to add some modifiers to get modified plastics. Methods of PP modification: Grafting modification, crosslinking modification, toughening modification, filling modification, strengthening modification The reinforcement...

Compared with other nylons, PA12 long carbon fiber composite material has low density, good low temperature resistance and wear resistance, has a certain degree of self-lubrication, and its water absorption rate is lower than other nylons. The resistance to stress cracking is better than PA6 and PA66, and it has excellent resistance to alkali, oil and grease. PA12 resin has high crystallinity, low...

First, polypropylene is not a glass fiber. Polypropylene is extracted from petroleum, a semi-crystalline thermoplastic. Has high impact resistance and mechanical properties, resistance to a variety of organic solvents and acid-base corrosion. The glass fiber is an inorganic non-metallic material with many types, good insulation, good corrosion resistance, and high mechanical strength. Polypropylen...

LFT is called long fiber reinforced Thermoplastic Engineering material,Use different plastic base greases, mixed with long fibers, apply impregnation process, pultruded into elongated modified fiber particles, and then cut into lengths ranging from 6-25mm according to the application scenario. There are three types of fiber, one is glass fiber, one is carbon fiber and the other is the newly develo...