-
Nice To Meet you ,LFT-G
2019-06-26
As we all know, the full name of LFT is Long Fiber reinforced Thermoplastics we all know, the full name of LFT is Long Fiber reinforced Thermoplastics,--Xiamen LFT composite plastic Co.,ltd;,--Xiamen LFT composite plastic Co.,ltd; the name of the company cleverly quotes the industry word of the industry. Fortunately, we officially registered the factory from 2012 to 2016, and gradually established...
view more
-
Long fiber reinforced plastic really a replacement for metal
2019-07-11
Is long fiber reinforced plastic a plastic? Is it really a replacement for metal? The difference between long fiber reinforced plastics and traditional chopped, short glass fiber reinforced composites is the length of the fiber. It is a kind of plastic - we call it modified plastic. With the continuous development of long fiber reinforced plastic technology and process, PP polypropylene /PA6&6...
view more
-
Injection molding process of thermoplastic TPU
2020-05-04
Injection molding TPU long glass fiber TPU reinforced thermoplastic urethanes The most suitable processing method of TPU is screw injection molding machine. With a single screw of normal length, a three-stage screw can produce a lot of good plasticized uniform melt. If high plasticizing capacity (production capacity) is required, a longer screw can be used. Injection molding TPU long glass fiber T...
view more
-
TPU thermoplastic urethanes injection process resume
2020-06-09
TPU polyurethane elastomer injection molding Injection The most suitable processing method of TPU is screw injection molding machine. With a single thread of normal length, the three-section screw can produce a well-plasticized uniform melt. If high plasticizing capacity is required, TPU LONG GLASS FIBER REINFOCED THERMOPLASTIC requires the use of longer screws. Screws in the short compression zon...
view more
-
LFT Polyamide PA66 Reinforced Modified Nylon
2020-12-15
Lft-long fiber PA66 reinforced modified nylon automotive lightweight material high wear resistance PA66 material Product model: PA66-Na-LGF Processing level: injection molding level Advantages: 1. High toughness; 2. Low warping; 3. Resistance to fatigue, high temperature and aging Packing: 25 kg/BAG Application: it can be used in the manufacture of mechanical, automobile, chemical, electrical and ...
view more
-
PP long fiber modified materials used for automotive components
2021-03-19
At present, the modified PP materials used in automobiles at home and abroad are mainly divided into the following four varieties: (1) toughening type That is to elastomer mainly toughened modified PP material, with extremely high impact strength and low temperature toughness, mainly used for the manufacture of car bumpers. (2) filling toughening type As inorganic filler, elastomer toughening modi...
view more
-
Types of modified materials and advantages of long fiber modified materials
2021-03-25
According to the long fibers in the plastics, they can be divided into short fiber reinforced thermoplastics (generally 0.2 to 0.4 mm in length), long fiber reinforced thermoplastics (generally more than 10 mm in length) and continuous fiber reinforced thermoplastics. At present, long glass fiber reinforced thermoplastics, according to the classification of the process, mainly includes t...
view more
-
LFT Processing Guidance and Suggestions
2021-04-23
Introducation LFT-G is the product name for long fiber reinforced thermoplastic materials for injection moldings,compression molding and extrusion.Retention of fiber length in the finished part is key to the performance .Fiber length is retained by proper use of free flowing check valves,metering screws and a complete evaluation of the mold to reduce high shear and allow the materials to fill the ...
view more
-
LFT types Long glass fiber and long carbon fiber granules introduction
2021-05-14
Long Fiber (Xiamen) New Material Technology Co., Ltd. was established in 2009, the main business: abbreviated as LFT-G, LFRT, series of long glass fiber (LGF) and long carbon fiber ( LCF) development and production of PP, PA6, PA66, PPA, PA12, TPU, PBT, PLA, PET, PPS, PEEK, and other engineering plastics LFT long fiber reinforced grades, LFT plastics, injection molding materials, LFT particles, LF...
view more
-
long glass fiber enhance granules for injection mold
2021-05-21
Therefore, 10~25mm long glass fiber reinforced plastics (LGFPP) compared with ordinary 4~7mm short glass fiber reinforced plastics (GFPP) has higher strength, stiffness, toughness, as well as dimensional stability, low warpage advantages.In addition, long glass fiber reinforced polypropylene material does not produce obvious creep even at 100℃, and has better creep resistance than short glass fibe...
view more
-
Comparison of mechanical properties between LFT and SFT composites
2021-06-23
The fiber size of SFT composite material is short (1~3 mm). After the screw plasticizing and injection molding of the injection molding machine, the fiber length in the product will be further shortened (0.2~0.5 mm), the fiber retention length will be less than 0.3 mm, the size will be less than the critical length of the size, so SGF can not play a strengthening role. The fibers in the LFT compos...
view more
-
Consumption trend of modified composites
2021-08-02
Modified plastics have become a consumer trend, and behind this trend are the following five factors: 1. High performance: Long fiber enhance Modified plastics not only have the advantages of traditional plastics, such as low density and corrosion resistance, but also have improved physical and mechanical properties, such as high strength, high toughness, high impact resistance, wear resistance an...
view more
e-mail
English
français
Deutsch
русский
italiano
español
português
العربية
日本語
한국의
中文