-
Intelligent and Lightweight: Carbon Fiber Composites Leading Battery Structural Innovation
2024-09-02
Carbon Fiber Reinforced Polymer (CFRP) occupies a significant position in modern industry due to its exceptional physical and mechanical properties, especially in the fields of aerospace and high-performance automotive applications. With the rapid growth of the electric vehicle (EV) and energy storage system (ESS) markets, the demand for efficient, lightweight battery systems is increasing. - Trad...
view more
-
(Ⅲ) How to deal with flow marks on injection-molded parts?
2024-09-27
Mold temperature too low Cause: The low mold temperature causes the molten plastic to cool too quickly in the runner, preventing full fusion. Solution: Increase the mold temperature to ensure the molten plastic flows smoothly and fuses completely. Injection speed too slow Cause: Slow injection speed causes the plastic to flow slowly, extending cooling time and forming weld lines. Solution: Increas...
view more
-
The application of advanced composite materials in drone structural components.
2024-10-28
Unmanned Aerial Vehicle (UAV), commonly referred to as "drone," is an aircraft that is operated without a human pilot on board, using radio remote control and onboard programmed control systems, or fully or intermittently autonomous operation via onboard computers. As a new type of aircraft, drones differ from manned aircraft in terms of operational requirements and mission objectives. Drones typi...
view more
-
Overview of 8 Non-Destructive Testing (NDT) Methods for Composite Materials
2024-11-01
Composite materials are new materials created through advanced material preparation techniques that combine components with different properties in an optimized manner. In the 1940s, due to the needs of the aviation industry, fiberglass-reinforced plastics (commonly known as fiberglass) were developed, marking the beginning of the term "composite materials." After the 1950s, high-strength and high...
view more
-
Eight Ways to Reduce Injection Molding Costs
2024-11-08
1. Production Workshop The layout of the production workshop should consider two main aspects: meeting production requirements and optimizing layout based on production flow, while ensuring flexible energy use under specific production conditions. (1) Power Supply: Ensure a stable power supply with a moderate buffer to avoid excessive energy waste from unused capacity. (2) Efficient Cooling Water ...
view more
-
Long Carbon Fiber vs. Short Carbon Fiber in 3D Printing
2024-11-11
In 3D printing, both long carbon fiber and short carbon fiber are used as reinforcement materials to enhance the strength and durability of printed parts. Here’s an overview of their differences: 1. Long Carbon Fiber Long carbon fibers are continuous strands that are incorporated into the printing material. This type of fiber provides superior strength, stiffness, and structural integrity to the p...
view more
e-mail
English
français
Deutsch
русский
italiano
español
português
العربية
日本語
한국의
中文