-
What is PP gf40?
2021-12-22
That is, original polypropylene resin filling 40% glass fiber to improve the performance of polypropylene. Glass fiber modification is one of the most important ways to enhance modification, and glass fiber modification is also divided into short glass fiber modification, long glass fiber modification and continuous fiber modification. LFT-G company specializes in the production of long glass fibe...
view more
-
Is glass filled nylon heat resistant?
2021-12-23
The mechanical properties of blended materials such as glass fiber and toughening agent are added to nylon. The results show that with the increase of glass fiber content, the tensile strength and bending strength of the material are greatly improved, and the impact strength is more complicated. Adding, the toughness of the material is greatly improved. Adding 30% to 35% of glass fiber, 8% to 12% ...
view more
-
What is nylon composite?
2021-12-30
Nylon and carbon fiber are both excellent materials in the field of engineering plastics. The composite material comprehensively reflects the advantages of the two. For example, the strength and rigidity are much higher than that of unreinforced nylon, the high temperature creep is small, and the thermal stability is significantly improved. , Good dimensional accuracy and wear resistance. It has e...
view more
-
Nylon Polymer Application Case
2022-01-17
Polyamide polymers (long fiber modified nylon) are mainly used in the automotive industry as the following components: ①The radiator is a large product made of glass fiber reinforced polyamide. After replacing the original metal material with polyamide, the weight of the product can be greatly reduced. ②The pulley is a product made of glass fiber reinforced polyamide added with graphite. After rep...
view more
-
Is glass filled polymer strong?
2022-03-04
Glass-filled polymers are strong and have strong mechanical properties. First, the analytical strength is generally interpreted from the three dimensions of tensile strength, flexural strength and impact strength. For example, glass fiber filled PP, the obtained PP GF polymer, the higher the glass fiber content, the better the performance, we can refer to the following TDS, from the following tabl...
view more
-
Composite Industry: LFT-D long fiber reinforced thermoplastics process introduction
2022-11-24
1 Overview 1.1 Introduction LFT-D is short for Long Fiber Reinforce Thermoplastic In Direct Processing. 1.2 Process Characteristics Compared with GMT and LDT-G, which rely on semi-finished plates or granules, LDT-D technology directly uses polymer masterbatch and glass fiber for daily production, which eliminates the intermediate process of plate making or granuleting, reduces cost and makes the s...
view more
-
Long glass fiber PP so many years, are flowing to what application field?
2022-12-01
In recent years, long glass fiber modified PP is extremely popular in the modified plastic industry. Long glass fiber reinforced PP material is cheap, has no less than the excellent performance of reinforced engineering plastics, the combination of these two points show the advantages of high cost performance, is widely favored by the industry. At present, these manufacturers have invested a lot o...
view more
-
Analysis of carbon fiber reinforced plastic composite CFRP
2023-02-08
Carbon fiber reinforced plastic composite (CFRP) is a lightweight, strong material that can be used to make a wide range of products used in everyday life. It is a term used to describe fiber reinforced composites with carbon fiber as the main structural component. Note that the "P" in CFRP can also stand for "plastic" rather than "polymer." Typically, CFRP composites use thermosetting resins such...
view more
-
3 minutes to understand TPU material
2023-02-21
What is the TPU material? TPU(Thermoplastic polyurethanes) name is thermoplastic polyurethane elastomer rubber, TPU is a kind of polymer material between rubber and plastic, which is synthesized by reaction polymerization of diphenyl methane diisocyanate (MDI), toluene diisocyanate (TDI) and other diisocyanate molecules with macromolecular polyols and low molecular polyols (chain extender). It has...
view more
-
The related knowledge of nylon
2023-02-23
Invention of nylon Nylon (Nylon), named Polyamide in English, is a man-made polymer. Wallace Carothers of DuPont invented the plastic on February 28, 1935, in Wilmington, USA. Nylon was officially marketed in 1938. The first nylon products were nylon brushes for toothbrushes (sold on February 24, 1938) and nylon stockings for women (sold on May 15, 1940). The appearance of nylon makes the textile ...
view more
-
The differences, advantages and disadvantages of PP copolymerization and homopolymerization
2023-02-24
Polypropylene (PP) is divided into homopolymer polypropylene (PP-H), block (impact resistance) copolymer polypropylene (PP-B) and random (random) copolymer polypropylene (PP-R), so what are the advantages and disadvantages of all kinds of PP? I'll share it with you here. 1. Homopolymer polypropylene (PP-H) It is made by polymerization of a single propylene monomer. The molecular chain does not con...
view more
-
New choice of environmentally friendly materials-long fiber reinforced composite material Q&A
2023-03-28
● What is long fiber reinforced composite (LFT-G)? The included length of Reinforced fiber is equivalent to the length of plastic particles larger than 6mm thermoplastic. ● What are the benefits of using LFT-G? Benefits for business owners and factories: a. Plastic instead of steel: The past metal material with high strength, heat resistance and other characteristics, is the preferred material for...
view more
e-mail
English
français
Deutsch
русский
italiano
español
português
العربية
日本語
한국의
中文