As we all know, the full name of LFT is Long Fiber reinforced Thermoplastics we all know, the full name of LFT is Long Fiber reinforced Thermoplastics,--Xiamen LFT composite plastic Co.,ltd;,--Xiamen LFT composite plastic Co.,ltd; the name of the company cleverly quotes the industry word of the industry. Fortunately, we officially registered the factory from 2012 to 2016, and gradually established...

Is long fiber reinforced plastic a plastic? Is it really a replacement for metal? The difference between long fiber reinforced plastics and traditional chopped, short glass fiber reinforced composites is the length of the fiber. It is a kind of plastic - we call it modified plastic. With the continuous development of long fiber reinforced plastic technology and process, PP polypropylene /PA6&6...

Injection molding TPU long glass fiber TPU reinforced thermoplastic urethanes The most suitable processing method of TPU is screw injection molding machine. With a single screw of normal length, a three-stage screw can produce a lot of good plasticized uniform melt. If high plasticizing capacity (production capacity) is required, a longer screw can be used. Injection molding TPU long glass fiber T...

TPU polyurethane elastomer injection molding Injection The most suitable processing method of TPU is screw injection molding machine. With a single thread of normal length, the three-section screw can produce a well-plasticized uniform melt. If high plasticizing capacity is required, TPU LONG GLASS FIBER REINFOCED THERMOPLASTIC requires the use of longer screws. Screws in the short compression zon...

At present, the modified PP materials used in automobiles at home and abroad are mainly divided into the following four varieties: (1) toughening type That is to elastomer mainly toughened modified PP material, with extremely high impact strength and low temperature toughness, mainly used for the manufacture of car bumpers. (2) filling toughening type As inorganic filler, elastomer toughening modi...

According to the long fibers in the plastics, they can be divided into short fiber reinforced thermoplastics (generally 0.2 to 0.4 mm in length), long fiber reinforced thermoplastics (generally more than 10 mm in length) and continuous fiber reinforced thermoplastics. At present, long glass fiber reinforced thermoplastics, according to the classification of the process, mainly includes t...

Introducation LFT-G is the product name for long fiber reinforced thermoplastic materials for injection moldings,compression molding and extrusion.Retention of fiber length in the finished part is key to the performance .Fiber length is retained by proper use of free flowing check valves,metering screws and a complete evaluation of the mold to reduce high shear and allow the materials to fill the ...

Long Fiber (Xiamen) New Material Technology Co., Ltd. was established in 2009, the main business: abbreviated as LFT-G, LFRT, series of long glass fiber (LGF) and long carbon fiber ( LCF) development and production of PP, PA6, PA66, PPA, PA12, TPU, PBT, PLA, PET, PPS, PEEK, and other engineering plastics LFT long fiber reinforced grades, LFT plastics, injection molding materials, LFT particles, LF...

Therefore, 10~25mm long glass fiber reinforced plastics (LGFPP) compared with ordinary 4~7mm short glass fiber reinforced plastics (GFPP) has higher strength, stiffness, toughness, as well as dimensional stability, low warpage advantages.In addition, long glass fiber reinforced polypropylene material does not produce obvious creep even at 100℃, and has better creep resistance than short glass fibe...

Modified plastics have become a consumer trend, and behind this trend are the following five factors: 1. High performance: Long fiber enhance Modified plastics not only have the advantages of traditional plastics, such as low density and corrosion resistance, but also have improved physical and mechanical properties, such as high strength, high toughness, high impact resistance, wear resistance an...

TPU is usually medium to generally transparent, and some are milky white or turbid. Polyether TPU after adding long glass fiber is much more transparent than polyester TPU. Through the thermal analysis of TPU grades, its performance in various applications can be measured. TPU relies on heat to obtain new shapes during extrusion and injection molding. Since multifunctional TPUs need to be heated r...

First, polypropylene is not a glass fiber. Polypropylene is extracted from petroleum, a semi-crystalline thermoplastic. Has high impact resistance and mechanical properties, resistance to a variety of organic solvents and acid-base corrosion. The glass fiber is an inorganic non-metallic material with many types, good insulation, good corrosion resistance, and high mechanical strength. Polypropylen...