-
(Ⅱ) How to deal with floating fibers on injection-molded parts?
2024-09-27
Mold temperature too low Cause: If the mold temperature is too low, the melt cools too quickly during flow, causing the glass fibers to not be fully encapsulated by the base resin and float to the surface. Solution: Increase the mold temperature appropriately to ensure the melt has sufficient fluidity to uniformly coat the glass fibers. Regularly check the mold temperature control system to ensure...
view more
-
Tsinghua University: Study on the Comprehensive Performance and Influencing Factors of Long Glass Fiber Reinforced PA66 Composites
2024-10-22
Introduction Fiber-reinforced polymer composites, due to their lightweight and high-strength characteristics, have found applications in many fields, especially in the transportation sector, where they can effectively reduce vehicle weight and better achieve energy savings and emission reductions. Among them, long glass fiber (LGF) reinforced polyamide materials (PA/LGF) are widely used in the man...
view more
-
Eight Ways to Reduce Injection Molding Costs
2024-11-08
1. Production Workshop The layout of the production workshop should consider two main aspects: meeting production requirements and optimizing layout based on production flow, while ensuring flexible energy use under specific production conditions. (1) Power Supply: Ensure a stable power supply with a moderate buffer to avoid excessive energy waste from unused capacity. (2) Efficient Cooling Water ...
view more
-
How to increase the gloss of ABS injection-molded products?
2024-11-11
Injection Mold 1. If the mold cavity is poorly machined, with defects such as scratches, micro-pores, wear, or rough surfaces, it will affect the gloss of the plastic part. To address this, ensure precise machining of the mold to achieve a lower surface roughness for the cavity; if necessary, polish and chrome-plate the cavity. 2. If the cavity surface has oil stains, watermarks, or excessive mold...
view more
-
Do you know which nylon materials are used in new energy vehicles?
2024-11-15
In the new energy vehicle materials industry, polymers encompass plastics, rubber, silicone materials, and composite fiber materials such as carbon fiber. To avoid safety hazards associated with high-voltage systems, materials for new energy vehicles must not only be heat-resistant but also flame-retardant. Therefore, Xiamen LFT has introduced a flame-retardant polyamide solution targeting manufac...
view more
-
PEEK Shines at the Zhuhai Airshow! Applications of PEEK in Aerospace
2024-11-18
Introduction Applications of PEEK in the Aerospace Field The 15th China International Aviation and Aerospace Exhibition opened in Zhuhai on November 12, showcasing an array of major "national treasures" in the aerospace field, reflecting remarkable advancements. The airshow featured an unprecedented flight performance, with the Air Force's aerobatic team dazzling the audience. Followin...
view more
e-mail
English
français
Deutsch
русский
italiano
español
português
العربية
日本語
한국의
中文