Blog

The advantages of glass fiber reinforced plastic granules 2021-07-08

Glass fiber reinforced plastic is based on the original pure plastic, adding glass fiber and other additives to increase the use range of the material. Generally speaking, most of the glass fiber reinforced materials are mostly used in the structural parts of the product, which is a structural engineering material; such as: PP ABS PA66 PA6 TPU POM PPO PET PBT PPS HDPE Advantage: 1. After glass fib...

Tags :

Comparison of mechanical properties between LFT and SFT composites 2021-06-23

The fiber size of SFT composite material is short (1~3 mm). After the screw plasticizing and injection molding of the injection molding machine, the fiber length in the product will be further shortened (0.2~0.5 mm), the fiber retention length will be less than 0.3 mm, the size will be less than the critical length of the size, so SGF can not play a strengthening role. The fibers in the LFT compos...

Tags :

long glass fiber enhance granules for injection mold 2021-05-21

Therefore, 10~25mm long glass fiber reinforced plastics (LGFPP) compared with ordinary 4~7mm short glass fiber reinforced plastics (GFPP) has higher strength, stiffness, toughness, as well as dimensional stability, low warpage advantages.In addition, long glass fiber reinforced polypropylene material does not produce obvious creep even at 100℃, and has better creep resistance than short glass fibe...

Tags :

LFT types Long glass fiber and long carbon fiber granules introduction 2021-05-14

Long Fiber (Xiamen) New Material Technology Co., Ltd. was established in 2009, the main business: abbreviated as LFT-G, LFRT, series of long glass fiber (LGF) and long carbon fiber ( LCF) development and production of PP, PA6, PA66, PPA, PA12, TPU, PBT, PLA, PET, PPS, PEEK, and other engineering plastics LFT long fiber reinforced grades, LFT plastics, injection molding materials, LFT particles, LF...

Tags :

PA66 50%content GF&LGF thermoplastic material comparison 2021-04-30

In the face of high load and impact stress at high temperature and conductions,common short glass fiber materials are often unable to match,in this case,the polymer began to soften or brittle,long glass fiber reinforced thermoplastic polymer came into being. The product process of long glass fiber modified Pa66 materials is not complicated,and there are many material manufacturers on the market ca...

Tags :

LFT Processing Guidance and Suggestions 2021-04-23

Introducation LFT-G is the product name for long fiber reinforced thermoplastic materials for injection moldings,compression molding and extrusion.Retention of fiber length in the finished part is key to the performance .Fiber length is retained by proper use of free flowing check valves,metering screws and a complete evaluation of the mold to reduce high shear and allow the materials to fill the ...

Tags :

ABS long glass fiber and long carbon fiber for helmet 2021-04-02

The helmet industry still has a very large market potential.Helmets play a protective role during travel, so they are an essential protective measure for anyone who enjoys outdoor sports and cycling.Helmets are beloved both in China and abroad. The Ministry of Public Security's slogan of "One helmet, one belt" in 2020 has inspired many office workers to use helmets. What are the materials and manu...

Tags :

Types of modified materials and advantages of long fiber modified materials 2021-03-25

According to the long fibers in the plastics, they can be divided into short fiber reinforced thermoplastics (generally 0.2 to 0.4 mm in length), long fiber reinforced thermoplastics (generally more than 10 mm in length) and continuous fiber reinforced thermoplastics. At present, long glass fiber reinforced thermoplastics, according to the classification of the process, mainly includes t...

Tags :

Long Carbon Fiber Reinforced Thermoplastic Granules Application 2021-03-24

Thermoplastic composites are glass Fiber, carbon Fiber, aramid Fiber and other reinforced thermoplastic resins, known abroad as FRTP (Fiber RINFORCED Thermo Plastics). From the perspective of production technology, plastic composites can be divided into two categories: short fiber reinforced composites and continuous fiber reinforced composites. (1) Short fiber reinforced composite material ① inje...

Tags :

PP long fiber modified materials used for automotive components 2021-03-19

At present, the modified PP materials used in automobiles at home and abroad are mainly divided into the following four varieties: (1) toughening type That is to elastomer mainly toughened modified PP material, with extremely high impact strength and low temperature toughness, mainly used for the manufacture of car bumpers. (2) filling toughening type As inorganic filler, elastomer toughening modi...

Tags :

what are you looking for?