-
LFT-G modified nylon makes the phone full screen. High temperature resistance is the key point
2019-03-11
The popularity of mobile phones around the world is self-evident. It can combine functional needs such as life, work and entertainment. With the development of the times, the large-screen mobile phone screen has been unable to meet our pursuit, and the comprehensive screen and no border are becoming hot demand. So how does the phone make a full screen? This is not a simple change in the size of th...
view more
-
Introduction to nylon carbon fiber PA6 PA66 Polyamide Pellets
2019-09-29
Carbon Fiber Reinforced Composite (CFRP) Carbon fiber is just a fiber that cannot be used to make parts. Therefore, carbon fiber should be used together with resin to make composite materials. Carbon fiber nylon, a type of conductive nylon, is a carbon fiber added to a nylon base. The material incorporates high-rigidity carbon fibers based on the properties of nylon, giving the material a higher m...
view more
-
A helt Long glass fiber PA6 66 reinforced
2020-05-18
A few days ago, from June 1, the whole country will carry out the "One Helmet and One Belt" security guard operation. A helmet-with a helmet A belt-with a seat belt. The purpose is to enhance the safety consciousness of motorcycle and electric bicycle riders wearing safety helmets, and the safety of automobile drivers and passengers, and to reduce traffic accident damage and mortality. Therefore, ...
view more
-
Long Carbon Fiber Reinforced Thermoplastic Granules Application
2021-03-24
Thermoplastic composites are glass Fiber, carbon Fiber, aramid Fiber and other reinforced thermoplastic resins, known abroad as FRTP (Fiber RINFORCED Thermo Plastics). From the perspective of production technology, plastic composites can be divided into two categories: short fiber reinforced composites and continuous fiber reinforced composites. (1) Short fiber reinforced composite material ① inje...
view more
-
Comparison of mechanical properties between LFT and SFT composites
2021-06-23
The fiber size of SFT composite material is short (1~3 mm). After the screw plasticizing and injection molding of the injection molding machine, the fiber length in the product will be further shortened (0.2~0.5 mm), the fiber retention length will be less than 0.3 mm, the size will be less than the critical length of the size, so SGF can not play a strengthening role. The fibers in the LFT compos...
view more
-
The advantages of glass fiber reinforced plastic granules
2021-07-08
Glass fiber reinforced plastic is based on the original pure plastic, adding glass fiber and other additives to increase the use range of the material. Generally speaking, most of the glass fiber reinforced materials are mostly used in the structural parts of the product, which is a structural engineering material; such as: PP ABS PA66 PA6 TPU POM PPO PET PBT PPS HDPE Advantage: 1. After glass fib...
view more
-
Carbon Fiber Fill PA12 Nylon12 Long Carbon Fiber Plastic Granules
2021-10-28
Compared with other nylons, PA12 long carbon fiber composite material has low density, good low temperature resistance and wear resistance, has a certain degree of self-lubrication, and its water absorption rate is lower than other nylons. The resistance to stress cracking is better than PA6 and PA66, and it has excellent resistance to alkali, oil and grease. PA12 resin has high crystallinity, low...
view more
-
Is glass filled nylon heat resistant?
2021-12-23
The mechanical properties of blended materials such as glass fiber and toughening agent are added to nylon. The results show that with the increase of glass fiber content, the tensile strength and bending strength of the material are greatly improved, and the impact strength is more complicated. Adding, the toughness of the material is greatly improved. Adding 30% to 35% of glass fiber, 8% to 12% ...
view more
-
What is nylon composite?
2021-12-30
Nylon and carbon fiber are both excellent materials in the field of engineering plastics. The composite material comprehensively reflects the advantages of the two. For example, the strength and rigidity are much higher than that of unreinforced nylon, the high temperature creep is small, and the thermal stability is significantly improved. , Good dimensional accuracy and wear resistance. It has e...
view more
-
Nylon Polymer Application Case
2022-01-17
Polyamide polymers (long fiber modified nylon) are mainly used in the automotive industry as the following components: ①The radiator is a large product made of glass fiber reinforced polyamide. After replacing the original metal material with polyamide, the weight of the product can be greatly reduced. ②The pulley is a product made of glass fiber reinforced polyamide added with graphite. After rep...
view more
-
High temperature resistant nylon can reduce the weight of automotive materials by 25-30%. What kinds are there?
2023-02-22
High temperature resistant nylon refers to the nylon material that can be used in the environment above 150℃ for a long time. The melting point is generally 290℃~320℃, and it maintains excellent mechanical properties in a wide temperature range and high humidity environment. High temperature resistant nylon has good wear resistance, heat resistance, oil resistance and chemical resistance. Compared...
view more
-
The related knowledge of nylon
2023-02-23
Invention of nylon Nylon (Nylon), named Polyamide in English, is a man-made polymer. Wallace Carothers of DuPont invented the plastic on February 28, 1935, in Wilmington, USA. Nylon was officially marketed in 1938. The first nylon products were nylon brushes for toothbrushes (sold on February 24, 1938) and nylon stockings for women (sold on May 15, 1940). The appearance of nylon makes the textile ...
view more
e-mail
English
français
Deutsch
русский
italiano
español
português
العربية
日本語
한국의
中文