Polyamide 66 Nylon is the common name for polyamide (PA), a generic term for thermoplastic resins containing repeating amide groups on the main chain of the molecule, including aliphatic polyamides, aliphatic-aromatic polyamides and aromatic polyamides. As one of the top five engineering plastics, nylon has an extremely wide range of industrial applications, mainly in automotive parts, mechanical parts, electronics and appliances, cosmetics, adhesives and packaging materials. Among them, the largest production and most widely used are aliphatic polyamides, mainly nylon 66 and nylon 6. Nylon 66 (PA66) is made by condensation of adipic acid and hexanediamine, which is a class of polyamide. Advantages: high strength, corrosion resistance, good wear resistance characteristics, and has self-lubricating, flame retardant, non-toxic environmental protection and other excellent performance. Disadvantages: poor heat resistance and acid resistance, low impact strength in dry state and low temperature, high water absorption affects the dimensional stability and electrical properties of products. Polyamide 66 filling long carbon fiber High-performance fibers are chemical fibers with high load-bearing capacity and high durability because they have a special physical or chemical structure embodied with some excellent characteristics that traditional fibers do not have, such as high temperature resistance, corrosion resistance, flame retardancy and other properties. Carbon fiber is an inorganic polymer material with carbon content higher than 90% obtained from organic fibers through carbonization and graphitization. Advantages: light weight, high strength, high modulus, high temperature resistance, wear resistance, corrosion resistance, fatigue resistance, electrical conductivity, thermal conductivity, etc. Disadvantages: high cost, relatively difficult to infiltrate, poor transparency, etc. Carbon fiber composite materials are very useful structural materials, which are not only light, high temperature resistant, but also have high tensile strength and elastic modulus, and are indispensable materials for the manufacture of spacecraft, rockets, missiles, high-speed aircraft and large passenger aircraft. In transportation, chemical industry, metallurgy, construction and other industrial sectors, as well as sports equipment and other aspects have a wide range of applications. The density of PA66/CF composites tends to increase slightly as the content of CF increases. This is due to the fact that the density of CF is larger compared to that of PA66. The fracture surface of PA66 is smoother, while the fracture surface of PA66/CF sample is extremely rough and CF is pulled out, which indicates that the CF in the system plays a good role in bearing the load when the composite sample is subjected to external force, and this fracture is a ductile fracture, therefore, PA66/CF composite is a ductile material. With the increase of CF content, the tensile strength of PA66/CF composites increased significantly. The flexural strength and flexural modulus of PA66/CF composites are increased substantially with the increase of CF content. Datasheet for reference We can provide PA66 filiing Long carbon fiber 20%-60%. If you need more datas, please contact us. Application Our products are mainly suitable for large products such as structural parts and load-bearing parts, and the above applications are for reference only.  If you have other products, please feel free to consult our technical experts to provide you with 1-to-1 service. Laboratory & Warehouse Teams & Customers Welcome to contact us for more informations!

What is the Polyamide 6 material Polyamide resin, the English name for polyamide, referred to as PA. commonly known as nylon (Nylon), it is a macromolecule repeating units in the main chain containing amide groups in the polymer of the general term. For the five engineering plastics in the production of the largest, most varieties, the most widely used varieties. PA66 (polyamide 66 or nylon 66), compared to PA6, is more widely used in the automotive industry, instrument housings and other products that require impact resistance and high strength. What is the Long carbon fiber (LCF) In the modified engineering plastics industry, long fiber reinforced composites are composites produced by a series of special modification methods using long carbon fibers, long glass fibers, aramid fibers, or basalt fibers and a polymer matrix. The biggest feature of long fiber composites is that they have superior performance that the original material does not have, if classified according to the length of the reinforcing material added, they can be divided into: long fiber, short fiber and continuous fiber composites. As mentioned at the beginning, long carbon fiber composites are one kind of long fiber reinforced composites, which is a new type of fiber material with high strength and high modulus fiber.LCF carbon fiber composites show high strength along the fiber axis direction, and have the characteristics of high strength, light weight, etc., and have a full range of mechanical properties such as density, specific strength, specific modulus and so on which are incomparable with other materials, which is a kind of new material with excellent mechanical properties and many special functions. It is a new material with excellent mechanical properties and many special functions. What are the advantages of PA66 filling LCF 1. Good mechanical strength 2. Excellent toughness 3. Excellent wear resistance and self-lubricating properties. 4. Good oil resistance 5. Excellent gas barrier 6. Excellent fluidity and moldability. 7. Excellent heat resistance Applications More application fields you can contact us for more technical advice. Exhibitions 2023 Certifications Quality Management System ISO9001/16949 Certification National Laboratory Accreditation Certificate Modified Plastics Innovation Enterprise Honorary Certificate Heavy metal REACH & ROHS testing Main materials

Polyamide 66 roving carbon fiber Nylon black color with heat resistance

injection mold and extrusion long glass fiber pa66 reinforced recycle pa6 pa66 granules

Polyamide 66 roving carbon fiber Nylon black color with heat resistance

Polyamide 66 roving carbon fiber Nylon black color with heat resistance

Polyamide 66 roving carbon fiber Nylon black color with heat resistance

Polyamide 66 roving carbon fiber Nylon black color with heat resistance

Polyamide 66 roving carbon fiber Nylon black color with heat resistance

Polyamide 66 roving carbon fiber Nylon black color with heat resistance

Polyamide 66 roving carbon fiber Nylon black color with heat resistance

PA66 carbon fiber conductive plastic reinforced nylon plastic material, which combines the electrical conductivity of metal (a voltage applied to both ends of the material, through the material through the current) and the various properties of plastic (that is, material molecules are composed of many small, repeated structural units).Density (g/cm3) : 1.2 ~ 1.7, conductive anti-static plastic shielding efficiency (30MHz-10GHz) : 60-85dB;, mainly used in electronics, integrated circuit packaging, electromagnetic shielding and other fields.It is an important type of conductive polymer materials.Conductive anti-static material Semi-conductive shielding material used in medium and high voltage cables.Conductive plastic is a kind of functional polymer material which mixes resin and conductive material and is processed in the way of plastic.Conductive anti-static plastic product density is low, the weight is reduced by 50%;Bending modulus (MPa) : 2400 ~ 6000. With the increase of carbon fiber content, the tensile strength, flexural strength and flexural elastic modulus of the composites all increase.The impact strength of the cantilever beam increases first and then decreases, and the impact strength reaches its maximum value when the carbon fiber mass fraction is 30%, which is. The reason is that when the fiber content is relatively large, the fracture stress and its energy threshold increase, and the absorption methods such as elongation of fracture path caused by avoiding fiber, demonding of fiber-matrix interface and fiber pull-out are added, while the internal notching effect of fiber increases slowly, thus increasing the impact strength.When the mass fraction of carbon fiber is more than 30%, the internal notching effect of carbon fiber increases with the increase of carbon fiber content, and the impact strength decreases. For more technical questions, please contact us:+ 86 139 5009 5727 WEB:www.lft-g.com