-
The advantages of glass fiber reinforced plastic granules
2021-07-08
Glass fiber reinforced plastic is based on the original pure plastic, adding glass fiber and other additives to increase the use range of the material. Generally speaking, most of the glass fiber reinforced materials are mostly used in the structural parts of the product, which is a structural engineering material; such as: PP ABS PA66 PA6 TPU POM PPO PET PBT PPS HDPE Advantage: 1. After glass fib...
view more
-
Consumption trend of modified composites
2021-08-02
Modified plastics have become a consumer trend, and behind this trend are the following five factors: 1. High performance: Long fiber enhance Modified plastics not only have the advantages of traditional plastics, such as low density and corrosion resistance, but also have improved physical and mechanical properties, such as high strength, high toughness, high impact resistance, wear resistance an...
view more
-
Is polypropylene a type of fiberglass?
2021-12-07
First, polypropylene is not a glass fiber. Polypropylene is extracted from petroleum, a semi-crystalline thermoplastic. Has high impact resistance and mechanical properties, resistance to a variety of organic solvents and acid-base corrosion. The glass fiber is an inorganic non-metallic material with many types, good insulation, good corrosion resistance, and high mechanical strength. Polypropylen...
view more
-
What is LFT material?
2021-12-09
LFT is called long fiber reinforced Thermoplastic Engineering material,Use different plastic base greases, mixed with long fibers, apply impregnation process, pultruded into elongated modified fiber particles, and then cut into lengths ranging from 6-25mm according to the application scenario. There are three types of fiber, one is glass fiber, one is carbon fiber and the other is the newly develo...
view more
-
What are examples of thermoplastics?
2021-12-10
What are some examples of thermoplastics? 1.PP material Polypropylene is a general-purpose resin closely related to our daily lives. 50% of the world's propylene and 60% of my country's propylene come from polypropylene. It is the fastest growing general-purpose plastic resin in the world, second only to polyethylene and polyvinyl chloride in total. LFT-G blends resin raw materials and long glass ...
view more
-
Lightweight Replace steel with plastic to make PA6 gearbox cover
2021-12-20
The chemical company LANXESS cooperated with a Hebei manufacturer of auto parts to develop the first gearbox side cover made of polyamide 6 (PA6) for the world-renowned SUV and pickup truck manufacturers. Compared with the original metal version (die-cast aluminum cover), the new version greatly improves the integration of different functional features. · Lightweight design solutions have achieved...
view more
-
What is PP gf40?
2021-12-22
That is, original polypropylene resin filling 40% glass fiber to improve the performance of polypropylene. Glass fiber modification is one of the most important ways to enhance modification, and glass fiber modification is also divided into short glass fiber modification, long glass fiber modification and continuous fiber modification. LFT-G company specializes in the production of long glass fibe...
view more
-
Is glass filled nylon heat resistant?
2021-12-23
The mechanical properties of blended materials such as glass fiber and toughening agent are added to nylon. The results show that with the increase of glass fiber content, the tensile strength and bending strength of the material are greatly improved, and the impact strength is more complicated. Adding, the toughness of the material is greatly improved. Adding 30% to 35% of glass fiber, 8% to 12% ...
view more
-
What is nylon composite?
2021-12-30
Nylon and carbon fiber are both excellent materials in the field of engineering plastics. The composite material comprehensively reflects the advantages of the two. For example, the strength and rigidity are much higher than that of unreinforced nylon, the high temperature creep is small, and the thermal stability is significantly improved. , Good dimensional accuracy and wear resistance. It has e...
view more
-
Nylon Polymer Application Case
2022-01-17
Polyamide polymers (long fiber modified nylon) are mainly used in the automotive industry as the following components: ①The radiator is a large product made of glass fiber reinforced polyamide. After replacing the original metal material with polyamide, the weight of the product can be greatly reduced. ②The pulley is a product made of glass fiber reinforced polyamide added with graphite. After rep...
view more
-
Is glass filled polymer strong?
2022-03-04
Glass-filled polymers are strong and have strong mechanical properties. First, the analytical strength is generally interpreted from the three dimensions of tensile strength, flexural strength and impact strength. For example, glass fiber filled PP, the obtained PP GF polymer, the higher the glass fiber content, the better the performance, we can refer to the following TDS, from the following tabl...
view more
-
Composite Industry: LFT-D long fiber reinforced thermoplastics process introduction
2022-11-24
1 Overview 1.1 Introduction LFT-D is short for Long Fiber Reinforce Thermoplastic In Direct Processing. 1.2 Process Characteristics Compared with GMT and LDT-G, which rely on semi-finished plates or granules, LDT-D technology directly uses polymer masterbatch and glass fiber for daily production, which eliminates the intermediate process of plate making or granuleting, reduces cost and makes the s...
view more
e-mail
English
français
Deutsch
русский
italiano
español
português
العربية
日本語
한국의
中文