Carbon Fiber Reinforced Composite (CFRP) Carbon fiber is just a fiber that cannot be used to make parts. Therefore, carbon fiber should be used together with resin to make composite materials. Carbon fiber nylon, a type of conductive nylon, is a carbon fiber added to a nylon base. The material incorporates high-rigidity carbon fibers based on the properties of nylon, giving the material a higher m...

Our factory recently launched a new product HDPE long glass fiber modified material. This material is one of the representative materials of our company's extrusion grade and is suitable for the extrusion of double-wall bellows. The biggest advantage of the double wall bellows made of HDPE modified material is light weight, small drainage resistance, high compressive strength, many advantages, can...

In the face of high load and impact stress at high temperature and conductions,common short glass fiber materials are often unable to match,in this case,the polymer began to soften or brittle,long glass fiber reinforced thermoplastic polymer came into being. The product process of long glass fiber modified Pa66 materials is not complicated,and there are many material manufacturers on the market ca...

The chemical company LANXESS cooperated with a Hebei manufacturer of auto parts to develop the first gearbox side cover made of polyamide 6 (PA6) for the world-renowned SUV and pickup truck manufacturers. Compared with the original metal version (die-cast aluminum cover), the new version greatly improves the integration of different functional features. · Lightweight design solutions have achieved...

Nylon and carbon fiber are both excellent materials in the field of engineering plastics. The composite material comprehensively reflects the advantages of the two. For example, the strength and rigidity are much higher than that of unreinforced nylon, the high temperature creep is small, and the thermal stability is significantly improved. , Good dimensional accuracy and wear resistance. It has e...

Polyamide polymers (long fiber modified nylon) are mainly used in the automotive industry as the following components: ①The radiator is a large product made of glass fiber reinforced polyamide. After replacing the original metal material with polyamide, the weight of the product can be greatly reduced. ②The pulley is a product made of glass fiber reinforced polyamide added with graphite. After rep...

In synthetic fiber manufacturing, the spinning fluid (melt or solution) after spinning forming and post-processing, resulting in a length of kilometers of fibers called filaments. Filament includes monofilament, compound filament and curtain filament. (1) monofilament The original refers to a continuous single fiber spun by a single hole spinneret, but in practical applications, it often includes ...

1. Preface Carbon fiber refers to the high strength and high modulus fiber with carbon content above 90%. The high temperature resistance is the first among all chemical fibers. It is made of acrylic and viscose fiber as raw material and oxidized and carbonized by high temperature. Material characteristics: carbon fiber is mainly composed of carbon elements, with high temperature resistance, anti-...

Long fiber reinforced thermoplastics (LFRT) are being used for injection molding applications with high mechanical properties. While LFRT technology can provide good strength, stiffness and impact properties, the processing method of this material plays an important role in determining what properties can be achieved in the final part. In order to successfully mold LFRTs, an understanding of some ...

At present, modern design tends to lightweight requirements, the use of plastic proportion is increasing, no matter what industry, as long as the plastic can replace the absolute metal, plastic another advantage is the process of low cost, molding easier. Among the many polymer plastic materials, nylon is the leader, especially in the automotive industry, basically can not be separated from the ny...

●What are the benefits of using LFRT materials? Benefits for business owners and factories. a. Plastic instead of steel: In the past, metal was the material of choice for many industrial products because of its high strength and heat resistance, but the disadvantage is that it is not suitable for molding complex shapes. Long glass fiber reinforced material (L.F.R.T) has the most similar performanc...

Long fibre reinforced thermoplastics (LFT) is the most commonly used base resin for LFT, followed by PP, PA and also PBT, PPS, PPA, TPU and other resins. It is worth mentioning that different fibers are needed for different resins to achieve better results. Development of LFT In 1980, Polymer Composites Corporation (PCI), USA, was the first to propose the theoretical design concept of LFT, and con...