Polyamide Pa

Filament, staple fiber, composite, profiled, microfiber... Can you tell the difference? 2023-03-29

In synthetic fiber manufacturing, the spinning fluid (melt or solution) after spinning forming and post-processing, resulting in a length of kilometers of fibers called filaments. Filament includes monofilament, compound filament and curtain filament. (1) monofilament The original refers to a continuous single fiber spun by a single hole spinneret, but in practical applications, it often includes ...

Tags :

Modified nylon PA6 and PA66 are what material, what is the difference between them? 2023-03-30

PA6, also known as nylon 6, is a translucent or opaque milky white particle, with thermoplastic, light weight, good toughness, chemical resistance and durability characteristics, generally used in auto parts, mechanical parts, electronic and electrical products, engineering accessories and other products. The chemical and physical properties of PA6 are similar to those of PA66; however, it has a l...

Tags :

The difference between high transparent PP and homopolymer PP 2023-05-11

1. Compare from transparency first Data show that the fog degree of high transparent PP is only 10%, the transmittance of more than 90%, and the fog degree of homopoly PP is 56%, that is to say, the transmittance of homopoly PP is only 44%. 2. From the appearance of glossiness The gloss of high transparent PP is 129.2%, while the gloss of homopolymer PP is only 99.6%. The gloss of high transparent...

Tags :

The difference between Polyamide6 and Polyamide66 2023-06-08

At present, modern design tends to lightweight requirements, the use of plastic proportion is increasing, no matter what industry, as long as the plastic can replace the absolute metal, plastic another advantage is the process of low cost, molding easier. Among the many polymer plastic materials, nylon is the leader, especially in the automotive industry, basically can not be separated from the ny...

Tags :

New choice of environmentally friendly materials - plastic instead of steel lightweight long-fiber reinforced composite materials Q & A 2023-06-27

●What are the benefits of using LFRT materials? Benefits for business owners and factories. a. Plastic instead of steel: In the past, metal was the material of choice for many industrial products because of its high strength and heat resistance, but the disadvantage is that it is not suitable for molding complex shapes. Long glass fiber reinforced material (L.F.R.T) has the most similar performanc...

Tags :

Technical Article: Difference between PA6 and PA66 2023-08-11

Polyamide resin, the English name for polyamide, PA for short, commonly known as nylon (Nylon). It is a macromolecular main chain repeating units containing amide groups in the polymer of the general term. Is the five engineering plastics in the production of the largest, most varieties, the most widely used varieties, and other polymer blends and alloys, etc., to meet different special requiremen...

Tags :

PEEK has become a hot trend for lightweight and excellent materials. 2024-01-02

Recently, PEEK material concept stocks continue to ferment. With new energy vehicles, robots, 3D printing and other new downstream requirements for lightweight enhancement, PEEK materials are expected to usher in explosive growth. 1. What is PEEK? PEEK, or polyether ether ketone, is a new semi-crystalline aromatic thermoplastic engineering plastic. Because its molecular chain contains a large numb...

Tags :

Automotive field long glass fiber reinforced PPA material 2024-01-09

1 Material overview and characteristics PPA, full name polyphthalamide, is a semi-aromatic polyamide with no less than 55% terephthalic acid or phthalic acid as raw material, commonly known as aromatic high temperature nylon. Long-term operating temperature up to 180℃, short-term temperature resistance up to 290℃, with high modulus, high hardness, high cost performance, low water absorption, dimen...

Tags :

Polyamide 12 LFT: Benefits and applications 2024-01-16

What is PA12-LCF? PA12-LCF is a thermoplastic material, belonging to the nylon class. PA12-LCF is based on nylon 12, which has 12 carbon atoms in each polymer repeat unit. Nylon 12 is also known as polyamide 12 or PA12. It is a semi-crystalline material with a high melting point (180°C) and a low moisture absorption rate (0.5%). It is also resistant to chemicals, wear and impact. PA12-LCF is a mod...

Tags :

Modified PP plastic materials in the field of home appliances 2024-01-24

HIPS and ABS are the first plastic materials used in household appliances, due to the high price of HIPS and ABS resin, the market has gradually developed PP(polypropylene) modified materials suitable for household appliance parts, and partially replaced HIPS and ABS resin in household appliance products with its advantages of low cost, light weight and good performance. Now the modified PP plasti...

Tags :

What is the water resistance of Long Glass Fiber reinforced Polyamide 6 material 2024-02-22

Polyamide 6 is a porous material, and its water resistance is affected by many factors, such as the quality of the material itself, the type and amount of additives, and the way it is treated during processing. In this matter, is the heat resistance of glass fiber reinforced PA6 material excellent? Is glass fiber reinforced PA6 material heat resistant to water? 1. Introduction of PA6 materials Pol...

Tags :

Understand carbon fiber reinforced nylon 66 composite materials in one article 2024-05-14

Nylon Nylon is the common name of polyamide (PA). It is a general name for thermoplastic resins containing repeating amide groups on the molecular main chain, including aliphatic polyamide, aliphatic-aromatic polyamide and aromatic polyamide. As the first of the five major engineering plastics, nylon has an extremely wide range of applications in industry, mainly in automotive parts, mechanical pa...

Tags :

what are you looking for?