-
Study on the properties of long glass fiber reinforced TPU/PBT flame retardant composites
2023-07-31
summaries 9,10-Dihydro-9-oxa-10-phospha-phenanthrene-10-oxide (DOPO) was utilized as a flame retardant for the preparation of mass fraction 20% long glass fiber (LGF) reinforced thermoplastic polyurethane/polybutylene terephthalate/DOPO (20% LGF/TPU/PBT/DOPO) flame retardant composites were prepared, and the flame retardancy, rheological and mechanical properties of the flame retardant composites ...
view more
-
What are the forms of application of TPU materials in the automotive industry?
2023-08-11
TPU, full name Thermoplastic Polyurethanes, is a thermoplastic polyurethane rubber which is combined by the hard chain segments of ammonia ester reacting with isocyanate and the soft chain segments of polyester or polyether with each other in a block, there is no or very little cross-linking on the chemical structure, and the molecule is basically linear, but there exists a certain amount of physi...
view more
-
Application and Market Development Trends of Composite Materials in Marine and Offshore Fields
2023-10-17
Carbon fiber composites (CFRP) have good acoustic, magnetic and electrical properties: good wave and sound transmission and non-magnetic, so they can be used to improve the stealth performance of warships. The use of composite materials in the superstructure of the ship can not only reduce the weight of the hull, but also by embedding a frequency selection layer with filtering function in the sand...
view more
-
Polyphenylene Sulfide (PPS): A Comprehensive Guide to High-Temperature Resistant Plastics
2023-10-26
Polyphenylene sulfide (PPS) is a high performance high temperature resistant engineering thermoplastic. It has a semi-crystalline structure and a unique combination of properties. They range from dimensional and thermal stability to high temperature and chemical resistance. Due to its excellent electrical insulation properties, it is suitable for electrical components. Learn more about this versat...
view more
-
Polyetheretherketone (PEEK): The Complete Guide to Ultra-High Performance Engineering Plastics
2023-10-26
Polyetheretherketone, commonly abbreviated as PEEK, is a high-performance engineering thermoplastic that belongs to the polyketone family. It is known for its excellent mechanical, thermal and chemical properties. These properties make PEEK suitable for a wide range of applications. Uses include the aerospace, automotive, medical and electronics industries. But do you know what makes it unique com...
view more
-
Polyester TPU and polyether TPU differences in detail
2023-12-15
TPU Introduction Thermoplastic polyurethane elastomer abbreviated as TPU, also known as PU thermoplastic, is a linear block copolymer composed of oligomer polyol soft segment and diisocyanate-chain extender hard segment. TPU molecule contains -NH-COO- groups, many of its characteristics depend on the type of long-chain diols, its hardness with hard segments to do the ratio to adjust its light agin...
view more
-
Automotive field long glass fiber reinforced PPA material
2024-01-09
1 Material overview and characteristics PPA, full name polyphthalamide, is a semi-aromatic polyamide with no less than 55% terephthalic acid or phthalic acid as raw material, commonly known as aromatic high temperature nylon. Long-term operating temperature up to 180℃, short-term temperature resistance up to 290℃, with high modulus, high hardness, high cost performance, low water absorption, dimen...
view more
-
Inventory of several common Non-Destructive Testing methods for composite materials
2024-03-04
About Composite material is a new material which uses advanced material preparation technology and optimally combines material components with different properties. In the 1940s, due to the needs of the aviation industry, glass fiber reinforced plastics were developed, and the name composite materials has appeared since then. Since the 1950s, high-strength and high-modulus fibers such as carbon fi...
view more
-
Application and development of thermoplastic composite materials in automobile body structural parts
2024-03-14
Foreword As an important means of transportation, cars play an important role in family travel and other aspects. At this stage, with the improvement of people's quality of life and their pursuit of higher quality of life, they have new requirements for car performance. In order to meet the needs of the public, automobile companies actively carry out automobile design and development, and constant...
view more
-
Fiber types and fiber forms for composite materials
2024-06-28
Types of fibers used in composite materials The structural properties of composite materials are mainly derived from fiber reinforcement. In composite materials, the fibers held in place by the matrix resin help to enhance tensile strength, enhancing the properties of the final part such as strength and stiffness, while minimizing weight. Fiber properties are determined by the fiber manufacturing ...
view more
-
From steel to composite materials: Research of multiple materials for battery casings
2024-08-07
Battery is one of the most important core components of electric vehicles, whether it is in the face of high temperature, wading and even impact, the safety of battery protection can not be ignored. To protect the safety of the battery, the battery shell is the most important thing. Since the battery is the core key component of electric vehicles, electric vehicle researchers have focused their at...
view more
-
Demand and trend analysis of composite materials for sports equipment
2024-08-08
1. Introduction The market size and variety of sports equipment continue to expand, providing more choices for people's health and recreational life. At the same time, the research and application of composite materials have also made remarkable progress, bringing innovation and breakthroughs to all walks of life. At the intersection of these two fields, it becomes an important research topic to e...
view more