-
Is glass filled nylon heat resistant?
2021-12-23
The mechanical properties of blended materials such as glass fiber and toughening agent are added to nylon. The results show that with the increase of glass fiber content, the tensile strength and bending strength of the material are greatly improved, and the impact strength is more complicated. Adding, the toughness of the material is greatly improved. Adding 30% to 35% of glass fiber, 8% to 12% ...
view more
-
What is nylon composite?
2021-12-30
Nylon and carbon fiber are both excellent materials in the field of engineering plastics. The composite material comprehensively reflects the advantages of the two. For example, the strength and rigidity are much higher than that of unreinforced nylon, the high temperature creep is small, and the thermal stability is significantly improved. , Good dimensional accuracy and wear resistance. It has e...
view more
-
Nylon Polymer Application Case
2022-01-17
Polyamide polymers (long fiber modified nylon) are mainly used in the automotive industry as the following components: ①The radiator is a large product made of glass fiber reinforced polyamide. After replacing the original metal material with polyamide, the weight of the product can be greatly reduced. ②The pulley is a product made of glass fiber reinforced polyamide added with graphite. After rep...
view more
-
Is glass filled polymer strong?
2022-03-04
Glass-filled polymers are strong and have strong mechanical properties. First, the analytical strength is generally interpreted from the three dimensions of tensile strength, flexural strength and impact strength. For example, glass fiber filled PP, the obtained PP GF polymer, the higher the glass fiber content, the better the performance, we can refer to the following TDS, from the following tabl...
view more
-
Composite Industry: LFT-D long fiber reinforced thermoplastics process introduction
2022-11-24
1 Overview 1.1 Introduction LFT-D is short for Long Fiber Reinforce Thermoplastic In Direct Processing. 1.2 Process Characteristics Compared with GMT and LDT-G, which rely on semi-finished plates or granules, LDT-D technology directly uses polymer masterbatch and glass fiber for daily production, which eliminates the intermediate process of plate making or granuleting, reduces cost and makes the s...
view more
-
Long glass fiber PP so many years, are flowing to what application field?
2022-12-01
In recent years, long glass fiber modified PP is extremely popular in the modified plastic industry. Long glass fiber reinforced PP material is cheap, has no less than the excellent performance of reinforced engineering plastics, the combination of these two points show the advantages of high cost performance, is widely favored by the industry. At present, these manufacturers have invested a lot o...
view more
-
Analysis of carbon fiber reinforced plastic composite CFRP
2023-02-08
Carbon fiber reinforced plastic composite (CFRP) is a lightweight, strong material that can be used to make a wide range of products used in everyday life. It is a term used to describe fiber reinforced composites with carbon fiber as the main structural component. Note that the "P" in CFRP can also stand for "plastic" rather than "polymer." Typically, CFRP composites use thermosetting resins such...
view more
-
What properties will change when fiber reinforced material is added?
2023-02-21
Fiber reinforced plastics is one of the most common reinforced plastics. Fiber reinforced plastics usually have the following characteristics. High strength and high modulus The quantity strength and modulus of fiber reinforced are obviously improved. Such as some general plastics after reinforcement, can also be used in engineering plastics; Some engineering plastics, through fiber reinforcement,...
view more
-
3 minutes to understand TPU material
2023-02-21
What is the TPU material? TPU(Thermoplastic polyurethanes) name is thermoplastic polyurethane elastomer rubber, TPU is a kind of polymer material between rubber and plastic, which is synthesized by reaction polymerization of diphenyl methane diisocyanate (MDI), toluene diisocyanate (TDI) and other diisocyanate molecules with macromolecular polyols and low molecular polyols (chain extender). It has...
view more
-
The differences, advantages and disadvantages of PP copolymerization and homopolymerization
2023-02-24
Polypropylene (PP) is divided into homopolymer polypropylene (PP-H), block (impact resistance) copolymer polypropylene (PP-B) and random (random) copolymer polypropylene (PP-R), so what are the advantages and disadvantages of all kinds of PP? I'll share it with you here. 1. Homopolymer polypropylene (PP-H) It is made by polymerization of a single propylene monomer. The molecular chain does not con...
view more
-
Polyamide 12 LFT: Benefits and applications
2024-01-16
What is PA12-LCF? PA12-LCF is a thermoplastic material, belonging to the nylon class. PA12-LCF is based on nylon 12, which has 12 carbon atoms in each polymer repeat unit. Nylon 12 is also known as polyamide 12 or PA12. It is a semi-crystalline material with a high melting point (180°C) and a low moisture absorption rate (0.5%). It is also resistant to chemicals, wear and impact. PA12-LCF is a mod...
view more
-
Modified PP plastic materials in the field of home appliances
2024-01-24
HIPS and ABS are the first plastic materials used in household appliances, due to the high price of HIPS and ABS resin, the market has gradually developed PP(polypropylene) modified materials suitable for household appliance parts, and partially replaced HIPS and ABS resin in household appliance products with its advantages of low cost, light weight and good performance. Now the modified PP plasti...
view more
e-mail
English
français
Deutsch
русский
italiano
español
português
العربية
日本語
한국의
中文