PEEK PEEK, commonly referred to as polyetheretherketone, is part of the polyetherketone family of semi-crystalline thermoplastics. However, the unique 2:1 ether (E) to ketone (K) ratio of PEEK polymers provides superior chemical resistance compared to other polyetherketones and is a major factor in the wider use of PEEK, which is not only available as a pure resin, but can also be modified by the addition of carbon fiberfill. Its properties PEEK-LCF PEEK-LCF30% with 30% long carbon fiber filler has been our mainstay, and LFT-G's PEEK LCF30% is formulated with 30% long carbon fiber reinforcement to achieve the highest mechanical strength and stiffness of any PEEK grade. And PEEK LCF30% is unaffected by repeated autoclave cycles and is resistant to a wide range of chemicals. It also meets FDA requirements for direct food contact applications and meets the aerospace industry's stringent flammability and low smoke requirements with a flame retardancy rating of UL 94 V-0. It has the wear and temperature resistance of PEEK and can withstand long-term exposure to steam, hot water and a wide range of chemicals. In particular, it performs well as a bearing material when operating on hard mating surfaces, and its materials are often used in precision machined parts. It has the highest strength and stiffness of any PEEK grade. Although it contains more reinforcement per unit volume, it is 7% lighter than glass-reinforced grades. It is an excellent choice for high-load machined or molded parts. TDS for your reference Appilcation Details Number Colour Length Sample Package MOQ Delivery time Port of Loading PEEK-NA-LCF30 Natural colour (can be customized) About 12mm (can be customized) Available 20kg/bag 20kg 7-15 days after shipment Xiamen Port Reasons for selection The above general-purpose grade PEEK-LCF is LFT-G's main product, LFT-G can also provide more custom modification services, we have also been committed to custom R & D production of special engineering plastics PEEK, PPS, PP, PA6, PA66, PA12, TPU, ABS, etc. 01 Factory direct sales, with high-tech factory Affordable price and high quality products. 02 Large amount of inventory, hundred tons of stock Adequate stock, quality and quantity assurance, on-time delivery, the company has its own warehouse, a full range of products. 03 Provide perfect supporting services for customers Zhenghao has a perfect pre-sales, sales and after-sales service system; the first time to solve the customer's concerns. Frequently asked questions Q. When using long carbon fiber engineering plastics, what is the solution to the lack of torque an insufficient injection pressure? A. You can change the injection molding machine to a larger size, or increase the molding temperature, increase the injection pressure. Q. The cost of long fiber products is higher. Does it has a high recycling value? A. The thermoplastic LFT long fiber material can be recycled and reused very well. Q. Using a long fiber reinforced thermoplastic material, will it block the die hole due to the long length of the fiber or not? A. When using long glass fiber or long carbon fiber, it is necessary to evaluate whether the product is suitable for LFT-G. If the product is too small or the dispensing is not suitable for long fiber materials. The long fiber itself has requirements for the mold nozzle.