-
Why are plastic materials modified?Can they really replace metals?
2021-02-26
As we all know, the difference between long fiber reinforced thermoplastic and traditional short fiber reinforced composites is the length of the fibers added, which we call modified materials.With the continuous improvement of the modification technology and the continuous improvement of the material performance, the case project of replacing metal with plastic has also been recognized and applie...
view more
-
Modified PPS engineering plastics PPS Filling Long Fiber Enhance Material
2021-03-05
PPS resin modified with long fibers is a kind of super - engineering plastics with excellent heat - resistance and chemical resistance.The number of modified PPS resins in use continues to grow, largely because they are widely used in automotive applications.Because automotive applications require heat-resistant, lightweight and high-strength materials instead of metals, PPS resins containing elas...
view more
-
PP long fiber modified materials used for automotive components
2021-03-19
At present, the modified PP materials used in automobiles at home and abroad are mainly divided into the following four varieties: (1) toughening type That is to elastomer mainly toughened modified PP material, with extremely high impact strength and low temperature toughness, mainly used for the manufacture of car bumpers. (2) filling toughening type As inorganic filler, elastomer toughening modi...
view more
-
Long Carbon Fiber Reinforced Thermoplastic Granules Application
2021-03-24
Thermoplastic composites are glass Fiber, carbon Fiber, aramid Fiber and other reinforced thermoplastic resins, known abroad as FRTP (Fiber RINFORCED Thermo Plastics). From the perspective of production technology, plastic composites can be divided into two categories: short fiber reinforced composites and continuous fiber reinforced composites. (1) Short fiber reinforced composite material ① inje...
view more
-
Types of modified materials and advantages of long fiber modified materials
2021-03-25
According to the long fibers in the plastics, they can be divided into short fiber reinforced thermoplastics (generally 0.2 to 0.4 mm in length), long fiber reinforced thermoplastics (generally more than 10 mm in length) and continuous fiber reinforced thermoplastics. At present, long glass fiber reinforced thermoplastics, according to the classification of the process, mainly includes t...
view more
-
ABS long glass fiber and long carbon fiber for helmet
2021-04-02
The helmet industry still has a very large market potential.Helmets play a protective role during travel, so they are an essential protective measure for anyone who enjoys outdoor sports and cycling.Helmets are beloved both in China and abroad. The Ministry of Public Security's slogan of "One helmet, one belt" in 2020 has inspired many office workers to use helmets. What are the materials and manu...
view more
-
LFT Processing Guidance and Suggestions
2021-04-23
Introducation LFT-G is the product name for long fiber reinforced thermoplastic materials for injection moldings,compression molding and extrusion.Retention of fiber length in the finished part is key to the performance .Fiber length is retained by proper use of free flowing check valves,metering screws and a complete evaluation of the mold to reduce high shear and allow the materials to fill the ...
view more
-
PA66 50%content GF&LGF thermoplastic material comparison
2021-04-30
In the face of high load and impact stress at high temperature and conductions,common short glass fiber materials are often unable to match,in this case,the polymer began to soften or brittle,long glass fiber reinforced thermoplastic polymer came into being. The product process of long glass fiber modified Pa66 materials is not complicated,and there are many material manufacturers on the market ca...
view more
-
LFT types Long glass fiber and long carbon fiber granules introduction
2021-05-14
Long Fiber (Xiamen) New Material Technology Co., Ltd. was established in 2009, the main business: abbreviated as LFT-G, LFRT, series of long glass fiber (LGF) and long carbon fiber ( LCF) development and production of PP, PA6, PA66, PPA, PA12, TPU, PBT, PLA, PET, PPS, PEEK, and other engineering plastics LFT long fiber reinforced grades, LFT plastics, injection molding materials, LFT particles, LF...
view more
-
long glass fiber enhance granules for injection mold
2021-05-21
Therefore, 10~25mm long glass fiber reinforced plastics (LGFPP) compared with ordinary 4~7mm short glass fiber reinforced plastics (GFPP) has higher strength, stiffness, toughness, as well as dimensional stability, low warpage advantages.In addition, long glass fiber reinforced polypropylene material does not produce obvious creep even at 100℃, and has better creep resistance than short glass fibe...
view more
-
Comparison of mechanical properties between LFT and SFT composites
2021-06-23
The fiber size of SFT composite material is short (1~3 mm). After the screw plasticizing and injection molding of the injection molding machine, the fiber length in the product will be further shortened (0.2~0.5 mm), the fiber retention length will be less than 0.3 mm, the size will be less than the critical length of the size, so SGF can not play a strengthening role. The fibers in the LFT compos...
view more
-
Consumption trend of modified composites
2021-08-02
Modified plastics have become a consumer trend, and behind this trend are the following five factors: 1. High performance: Long fiber enhance Modified plastics not only have the advantages of traditional plastics, such as low density and corrosion resistance, but also have improved physical and mechanical properties, such as high strength, high toughness, high impact resistance, wear resistance an...
view more
e-mail
English
français
Deutsch
русский
italiano
español
português
العربية
日本語
한국의
中文