-
PA66 50%content GF&LGF thermoplastic material comparison
2021-04-30
In the face of high load and impact stress at high temperature and conductions,common short glass fiber materials are often unable to match,in this case,the polymer began to soften or brittle,long glass fiber reinforced thermoplastic polymer came into being. The product process of long glass fiber modified Pa66 materials is not complicated,and there are many material manufacturers on the market ca...
view more
-
LFT types Long glass fiber and long carbon fiber granules introduction
2021-05-14
Long Fiber (Xiamen) New Material Technology Co., Ltd. was established in 2009, the main business: abbreviated as LFT-G, LFRT, series of long glass fiber (LGF) and long carbon fiber ( LCF) development and production of PP, PA6, PA66, PPA, PA12, TPU, PBT, PLA, PET, PPS, PEEK, and other engineering plastics LFT long fiber reinforced grades, LFT plastics, injection molding materials, LFT particles, LF...
view more
-
long glass fiber enhance granules for injection mold
2021-05-21
Therefore, 10~25mm long glass fiber reinforced plastics (LGFPP) compared with ordinary 4~7mm short glass fiber reinforced plastics (GFPP) has higher strength, stiffness, toughness, as well as dimensional stability, low warpage advantages.In addition, long glass fiber reinforced polypropylene material does not produce obvious creep even at 100℃, and has better creep resistance than short glass fibe...
view more
-
The advantages of glass fiber reinforced plastic granules
2021-07-08
Glass fiber reinforced plastic is based on the original pure plastic, adding glass fiber and other additives to increase the use range of the material. Generally speaking, most of the glass fiber reinforced materials are mostly used in the structural parts of the product, which is a structural engineering material; such as: PP ABS PA66 PA6 TPU POM PPO PET PBT PPS HDPE Advantage: 1. After glass fib...
view more
-
LFT TPU Glass fiber Plastic Granules Price
2021-08-23
TPU is usually medium to generally transparent, and some are milky white or turbid. Polyether TPU after adding long glass fiber is much more transparent than polyester TPU. Through the thermal analysis of TPU grades, its performance in various applications can be measured. TPU relies on heat to obtain new shapes during extrusion and injection molding. Since multifunctional TPUs need to be heated r...
view more
-
PP Modification Methods Are Generally Divided Into Chemical And Physical Modification
2021-09-13
PP modification methods are generally divided into chemical and physical modification: Chemical modification is cross-linking and grafting on molecular chain.Physical modification is to add some modifiers to get modified plastics. Methods of PP modification: Grafting modification, crosslinking modification, toughening modification, filling modification, strengthening modification The reinforcement...
view more
-
How is long glass reinforced polypropylene ( LGF ) made?
2021-09-26
Long fiber PP modified material is made by impregnation.PP raw resin material is heated and melted, evenly covered on the fiber of different glass fiber content, such as fully impregnated strip after cold water cooling, after the granulator will cut the fiber strip into 6-25mm particle length. Impregnation process can make glass fiber & carbon fiber orderly arrangement, so that the shear parti...
view more
-
PBT Fill Glass Fiber Composite Plastic For UV Resistance PBT Granules
2021-10-26
Glass fiber fill PBT reinforced composite , glass fiber and PBT resin binding force is good, adding a certain amount of glass fiber in PBT resin, not only can maintain the chemical resistance, processing and other original advantages of PBT resin, but also can greatly improve its mechanical properties, and overcome the gap sensitivity of PBT resin.After glass fiber modification, the tensile streng...
view more
-
Is polypropylene a type of fiberglass?
2021-12-07
First, polypropylene is not a glass fiber. Polypropylene is extracted from petroleum, a semi-crystalline thermoplastic. Has high impact resistance and mechanical properties, resistance to a variety of organic solvents and acid-base corrosion. The glass fiber is an inorganic non-metallic material with many types, good insulation, good corrosion resistance, and high mechanical strength. Polypropylen...
view more
-
What is LFT material?
2021-12-09
LFT is called long fiber reinforced Thermoplastic Engineering material,Use different plastic base greases, mixed with long fibers, apply impregnation process, pultruded into elongated modified fiber particles, and then cut into lengths ranging from 6-25mm according to the application scenario. There are three types of fiber, one is glass fiber, one is carbon fiber and the other is the newly develo...
view more
-
What are examples of thermoplastics?
2021-12-10
What are some examples of thermoplastics? 1.PP material Polypropylene is a general-purpose resin closely related to our daily lives. 50% of the world's propylene and 60% of my country's propylene come from polypropylene. It is the fastest growing general-purpose plastic resin in the world, second only to polyethylene and polyvinyl chloride in total. LFT-G blends resin raw materials and long glass ...
view more
-
Is glass filled nylon heat resistant?
2021-12-23
The mechanical properties of blended materials such as glass fiber and toughening agent are added to nylon. The results show that with the increase of glass fiber content, the tensile strength and bending strength of the material are greatly improved, and the impact strength is more complicated. Adding, the toughness of the material is greatly improved. Adding 30% to 35% of glass fiber, 8% to 12% ...
view more
e-mail
English
français
Deutsch
русский
italiano
español
português
العربية
日本語
한국의
中文