Xiamen LFT-G ABS plastic raw material filled Long glass fiber granules polymer injection molded

ABS engineering plastics are generally opaque, with a light ivory appearance, non-toxic, tasteless, and tough, hard and rigid characteristics. ABS particles have excellent mechanical properties, excellent impact strength, and can be used at extremely low temperatures; ABS has good dimensional stability and oil resistance, and can be used for bearings under moderate loads and speeds.ABS v0 plastic raw material burns fast when it catches fire, and it emits a lot of poisonous gas and black smoke during the combustion process, which is not conducive to practical application. Therefore, the blending of polymer with flame retardant and ABS granules can reduce the ignition point and make ABS more widely used.

1. Automotive industry

Many parts in the automotive industry are made of ABS granules. ABS is used in a large number of interior decoration parts. For example, glove boxes and glove box assemblies are made of heat-resistant ABS. Threshold up and down trims and water tank masks are made of ABS Made, in addition there are many parts using ABS as raw material.

2. Office machines

Due to the high gloss and easy formability of ABS, office equipment and machines need to have a beautiful appearance and a good feel. For example, memory shells and computers, fax machines, and copiers use a lot of parts made by ABS.

3. Household appliances

Because ABS has high gloss and easy formability, it has a wider market in home appliances.

1.What are the differences and advantages of long fiber materials and thermosets and staple fibers?

   A：Compared with the short fiber,it has more excellent performance in mechanical properties.It is more suitable for large product and structural parts.It has 1-3times higher toughness than short fiber,and the tensile strength is increased by 0.5-1 times. Compare  with thermosets.it is more environmentally friendly.It can be recycled and resued,and has simple molding efficiency,lower cost etc.But its mechanical properties are worse than thermosets.     

Another FAQ or question ,Please contact Ms lucy,sale04@lfrtplastic.com