Glass fiber fill PBT reinforced composite , glass fiber and PBT resin binding force is good, adding a certain amount of glass fiber in PBT resin, not only can maintain the chemical resistance, processing and other original advantages of PBT resin, but also can greatly improve its mechanical properties, and overcome the gap sensitivity of PBT resin.After glass fiber modification, the tensile streng...

Polybutanediol terephthalate (PBT) has excellent comprehensive properties, such as high crystallinity, rapid prototyping, weather resistance, low friction coefficient, high thermal deformation temperature, good electrical properties, excellent mechanical properties, fatigue resistance, can be ultrasonic welding. However, its notched impact strength is low, forming shrinkage rate is large, hydrolys...

Polyethylene terephthalate (PET) belongs to the polyester family. It is semi-crystalline when stable. It is recyclable and is resistant to impact, moisture, alcohol and solvents. It is one of the plastics that is an important part of everyday life. The polymer is used in the packaging, fabric and textile industries. It is also used in films to mold parts for automobiles, electronics and more. What...

Poly (butylene terephthalate) (PBT) is an excellent engineering material with excellent toughness, fatigue resistance, good heat resistance, good weather resistance, good electrical properties and low water absorption. Modified PBT material is to enhance its flame retardant modification, so as to improve its heat resistance, flame retardant, dimensional stability and modulus, used in automotive, e...

1. Production Workshop The layout of the production workshop should consider two main aspects: meeting production requirements and optimizing layout based on production flow, while ensuring flexible energy use under specific production conditions. (1) Power Supply: Ensure a stable power supply with a moderate buffer to avoid excessive energy waste from unused capacity. (2) Efficient Cooling Water ...

Injection Mold 1. If the mold cavity is poorly machined, with defects such as scratches, micro-pores, wear, or rough surfaces, it will affect the gloss of the plastic part. To address this, ensure precise machining of the mold to achieve a lower surface roughness for the cavity; if necessary, polish and chrome-plate the cavity. 2. If the cavity surface has oil stains, watermarks, or excessive mold...