-
PEEK has become a hot trend for lightweight and excellent materials.
2024-01-02
Recently, PEEK material concept stocks continue to ferment. With new energy vehicles, robots, 3D printing and other new downstream requirements for lightweight enhancement, PEEK materials are expected to usher in explosive growth. 1. What is PEEK? PEEK, or polyether ether ketone, is a new semi-crystalline aromatic thermoplastic engineering plastic. Because its molecular chain contains a large numb...
view more
-
Automotive field long glass fiber reinforced PPA material
2024-01-09
1 Material overview and characteristics PPA, full name polyphthalamide, is a semi-aromatic polyamide with no less than 55% terephthalic acid or phthalic acid as raw material, commonly known as aromatic high temperature nylon. Long-term operating temperature up to 180℃, short-term temperature resistance up to 290℃, with high modulus, high hardness, high cost performance, low water absorption, dimen...
view more
-
Polyamide 12 LFT: Benefits and applications
2024-01-16
What is PA12-LCF? PA12-LCF is a thermoplastic material, belonging to the nylon class. PA12-LCF is based on nylon 12, which has 12 carbon atoms in each polymer repeat unit. Nylon 12 is also known as polyamide 12 or PA12. It is a semi-crystalline material with a high melting point (180°C) and a low moisture absorption rate (0.5%). It is also resistant to chemicals, wear and impact. PA12-LCF is a mod...
view more
-
What is the water resistance of Long Glass Fiber reinforced Polyamide 6 material
2024-02-22
Polyamide 6 is a porous material, and its water resistance is affected by many factors, such as the quality of the material itself, the type and amount of additives, and the way it is treated during processing. In this matter, is the heat resistance of glass fiber reinforced PA6 material excellent? Is glass fiber reinforced PA6 material heat resistant to water? 1. Introduction of PA6 materials Pol...
view more
-
Application and development of thermoplastic composite materials in automobile body structural parts
2024-02-29
Abstract As an important means of transportation, cars play an important role in family travel. At this stage, with the improvement of people's quality of life and the higher pursuit of quality of life, there are new requirements for the performance of cars. In order to meet the needs of the public, automobile companies actively carry out car design and development, and constantly work hard in mat...
view more
-
LFT & SFT
2024-02-29
LFT is the product name for a family of long fiber reinforced thermoplastic materials for Injection Molding, Compression Molding and Extrusion applications. These materials differ from standard thermoplastic compounds in the length of the fiberglass in the pellets. Retention of fiber length in the finished part is key to the performance of LFT. The fiberglass is continuous within the pel...
view more
-
Five major carbon fiber reinforced thermoplastic composites
2024-03-04
Polymers are one of the most commonly used and well-known materials of the 21st century. However, pure polymers are not sufficient for use in industries that require great strength and excellent heat resistance. As a result, thermoplastic composites are the preferred materials, and creating these new materials will require overcoming obstacles such as high energy consumption, expensive material co...
view more
-
Application and development of thermoplastic composite materials in automobile body structural parts
2024-03-14
Foreword As an important means of transportation, cars play an important role in family travel and other aspects. At this stage, with the improvement of people's quality of life and their pursuit of higher quality of life, they have new requirements for car performance. In order to meet the needs of the public, automobile companies actively carry out automobile design and development, and constant...
view more
-
Copolymer vs. Homopolymers: What Are the Differences?
2024-03-25
Copolymers and homopolymers are distinct groups of polymers defined by the makeup and arrangement of their chemical structures. Homopolymers are distinguished by the fact that they are formed of one type of repeated monomer. Conversely, copolymers are made of at least two variants of monomers in any form of repeating pattern. While copolymers and homopolymers have some varying mechanical propertie...
view more
-
Five major carbon fiber reinforced thermoplastic composites
2024-04-15
Polymers are one of the most commonly used and well-known materials of the 21st century. However, pure polymers are not sufficient for use in industries that require great strength and excellent heat resistance. As a result, thermoplastic composites are the preferred materials, and creating these new materials will require overcoming obstacles such as high energy consumption, expensive material co...
view more
-
What is the effect of glass fiber content on flame retardancy of halogen-free flame retardant glass fiber reinforced polypropylene?
2024-04-30
Glass fiber reinforced polypropylene (PP/GF) has the advantages of low density, good heat and creep resistance, and high cost performance. It is widely used in electronic and electrical appliances, aerospace, automotive and other industries to prepare lightweight and thin-walled parts to replace steel, engineering plastics and other materials. The limiting oxygen index (LOI) of PP is about 17.0%, ...
view more
-
Does adding glass fiber affect the gloss of PP material
2024-04-30
The addition of glass fibers to the polymer usually makes its surface rougher, which can lead to a reduction in gloss. The specific degree of impact depends on the proportion, length and shape of the glass fiber added, as well as processing conditions and other factors. Glass fiber is relatively rough, and incompatible with plastic, added to the plastic material, resulting in a less smooth surface...
view more
e-mail
English
français
Deutsch
русский
italiano
español
português
العربية
日本語
한국의
中文