Wholesale Best Natral Color Polypropylene Resin Pellets Products,Factory Price Natral Color Polypropylene Resin Pellets

The advantages of glass fiber reinforced plastic granules 2021-07-08

Glass fiber reinforced plastic is based on the original pure plastic, adding glass fiber and other additives to increase the use range of the material. Generally speaking, most of the glass fiber reinforced materials are mostly used in the structural parts of the product, which is a structural engineering material; such as: PP ABS PA66 PA6 TPU POM PPO PET PBT PPS HDPE Advantage: 1. After glass fib...

Tags :

Consumption trend of modified composites 2021-08-02

Modified plastics have become a consumer trend, and behind this trend are the following five factors: 1. High performance: Long fiber enhance Modified plastics not only have the advantages of traditional plastics, such as low density and corrosion resistance, but also have improved physical and mechanical properties, such as high strength, high toughness, high impact resistance, wear resistance an...

Tags :

PP Modification Methods Are Generally Divided Into Chemical And Physical Modification 2021-09-13

PP modification methods are generally divided into chemical and physical modification: Chemical modification is cross-linking and grafting on molecular chain.Physical modification is to add some modifiers to get modified plastics. Methods of PP modification: Grafting modification, crosslinking modification, toughening modification, filling modification, strengthening modification The reinforcement...

Tags :

Carbon Fiber Fill PA12 Nylon12 Long Carbon Fiber Plastic Granules 2021-10-28

Compared with other nylons, PA12 long carbon fiber composite material has low density, good low temperature resistance and wear resistance, has a certain degree of self-lubrication, and its water absorption rate is lower than other nylons. The resistance to stress cracking is better than PA6 and PA66, and it has excellent resistance to alkali, oil and grease. PA12 resin has high crystallinity, low...

Tags :

What is PP gf40? 2021-12-22

That is, original polypropylene resin filling 40% glass fiber to improve the performance of polypropylene. Glass fiber modification is one of the most important ways to enhance modification, and glass fiber modification is also divided into short glass fiber modification, long glass fiber modification and continuous fiber modification. LFT-G company specializes in the production of long glass fibe...

Tags :

Is glass filled polymer strong? 2022-03-04

Glass-filled polymers are strong and have strong mechanical properties. First, the analytical strength is generally interpreted from the three dimensions of tensile strength, flexural strength and impact strength. For example, glass fiber filled PP, the obtained PP GF polymer, the higher the glass fiber content, the better the performance, we can refer to the following TDS, from the following tabl...

Tags :

Long glass fiber PP so many years, are flowing to what application field? 2022-12-01

In recent years, long glass fiber modified PP is extremely popular in the modified plastic industry. Long glass fiber reinforced PP material is cheap, has no less than the excellent performance of reinforced engineering plastics, the combination of these two points show the advantages of high cost performance, is widely favored by the industry. At present, these manufacturers have invested a lot o...

Tags :

Long glass fiber reinforced thermoplastic
PP application
Polypropylene

Analysis of carbon fiber reinforced plastic composite CFRP 2023-02-08

Carbon fiber reinforced plastic composite (CFRP) is a lightweight, strong material that can be used to make a wide range of products used in everyday life. It is a term used to describe fiber reinforced composites with carbon fiber as the main structural component. Note that the "P" in CFRP can also stand for "plastic" rather than "polymer." Typically, CFRP composites use thermosetting resins such...

Tags :

[Prosthetics] You know what? There are three main materials for prosthesis receiving cavity 2023-02-17

The thigh prosthesis is composed of a receiving cavity, a knee joint and a connector, among which the receiving cavity is the connecting part of the stump and the prosthesis, and its constituent materials have a great influence on the experience of use. There are three main materials used to make prosthetic chambers: resin, PP sheet and carbon fiber. Each receiving cavity has different characteris...

Tags :

The differences, advantages and disadvantages of PP copolymerization and homopolymerization 2023-02-24

Polypropylene (PP) is divided into homopolymer polypropylene (PP-H), block (impact resistance) copolymer polypropylene (PP-B) and random (random) copolymer polypropylene (PP-R), so what are the advantages and disadvantages of all kinds of PP? I'll share it with you here. 1. Homopolymer polypropylene (PP-H) It is made by polymerization of a single propylene monomer. The molecular chain does not con...

Tags :

Characteristics, main products, properties and applications of carbon fiber composites 2023-05-30

1. Preface Carbon fiber refers to the high strength and high modulus fiber with carbon content above 90%. The high temperature resistance is the first among all chemical fibers. It is made of acrylic and viscose fiber as raw material and oxidized and carbonized by high temperature. Material characteristics: carbon fiber is mainly composed of carbon elements, with high temperature resistance, anti-...

Tags :

How to mold long fiber reinforced thermoplastics? 2023-06-07

Long fiber reinforced thermoplastics (LFRT) are being used for injection molding applications with high mechanical properties. While LFRT technology can provide good strength, stiffness and impact properties, the processing method of this material plays an important role in determining what properties can be achieved in the final part. In order to successfully mold LFRTs, an understanding of some ...

Tags :

what are you looking for?