-
LFT Processing Guidance and Suggestions
2021-04-23
Introducation LFT-G is the product name for long fiber reinforced thermoplastic materials for injection moldings,compression molding and extrusion.Retention of fiber length in the finished part is key to the performance .Fiber length is retained by proper use of free flowing check valves,metering screws and a complete evaluation of the mold to reduce high shear and allow the materials to fill the ...
view more
-
PA66 50%content GF&LGF thermoplastic material comparison
2021-04-30
In the face of high load and impact stress at high temperature and conductions,common short glass fiber materials are often unable to match,in this case,the polymer began to soften or brittle,long glass fiber reinforced thermoplastic polymer came into being. The product process of long glass fiber modified Pa66 materials is not complicated,and there are many material manufacturers on the market ca...
view more
-
LFT types Long glass fiber and long carbon fiber granules introduction
2021-05-14
Long Fiber (Xiamen) New Material Technology Co., Ltd. was established in 2009, the main business: abbreviated as LFT-G, LFRT, series of long glass fiber (LGF) and long carbon fiber ( LCF) development and production of PP, PA6, PA66, PPA, PA12, TPU, PBT, PLA, PET, PPS, PEEK, and other engineering plastics LFT long fiber reinforced grades, LFT plastics, injection molding materials, LFT particles, LF...
view more
-
long glass fiber enhance granules for injection mold
2021-05-21
Therefore, 10~25mm long glass fiber reinforced plastics (LGFPP) compared with ordinary 4~7mm short glass fiber reinforced plastics (GFPP) has higher strength, stiffness, toughness, as well as dimensional stability, low warpage advantages.In addition, long glass fiber reinforced polypropylene material does not produce obvious creep even at 100℃, and has better creep resistance than short glass fibe...
view more
-
The advantages of glass fiber reinforced plastic granules
2021-07-08
Glass fiber reinforced plastic is based on the original pure plastic, adding glass fiber and other additives to increase the use range of the material. Generally speaking, most of the glass fiber reinforced materials are mostly used in the structural parts of the product, which is a structural engineering material; such as: PP ABS PA66 PA6 TPU POM PPO PET PBT PPS HDPE Advantage: 1. After glass fib...
view more
-
Consumption trend of modified composites
2021-08-02
Modified plastics have become a consumer trend, and behind this trend are the following five factors: 1. High performance: Long fiber enhance Modified plastics not only have the advantages of traditional plastics, such as low density and corrosion resistance, but also have improved physical and mechanical properties, such as high strength, high toughness, high impact resistance, wear resistance an...
view more
-
Carbon Fiber Fill PA12 Nylon12 Long Carbon Fiber Plastic Granules
2021-10-28
Compared with other nylons, PA12 long carbon fiber composite material has low density, good low temperature resistance and wear resistance, has a certain degree of self-lubrication, and its water absorption rate is lower than other nylons. The resistance to stress cracking is better than PA6 and PA66, and it has excellent resistance to alkali, oil and grease. PA12 resin has high crystallinity, low...
view more
-
Is polypropylene a type of fiberglass?
2021-12-07
First, polypropylene is not a glass fiber. Polypropylene is extracted from petroleum, a semi-crystalline thermoplastic. Has high impact resistance and mechanical properties, resistance to a variety of organic solvents and acid-base corrosion. The glass fiber is an inorganic non-metallic material with many types, good insulation, good corrosion resistance, and high mechanical strength. Polypropylen...
view more
-
What is LFT material?
2021-12-09
LFT is called long fiber reinforced Thermoplastic Engineering material,Use different plastic base greases, mixed with long fibers, apply impregnation process, pultruded into elongated modified fiber particles, and then cut into lengths ranging from 6-25mm according to the application scenario. There are three types of fiber, one is glass fiber, one is carbon fiber and the other is the newly develo...
view more
-
What are examples of thermoplastics?
2021-12-10
What are some examples of thermoplastics? 1.PP material Polypropylene is a general-purpose resin closely related to our daily lives. 50% of the world's propylene and 60% of my country's propylene come from polypropylene. It is the fastest growing general-purpose plastic resin in the world, second only to polyethylene and polyvinyl chloride in total. LFT-G blends resin raw materials and long glass ...
view more
-
Lightweight Replace steel with plastic to make PA6 gearbox cover
2021-12-20
The chemical company LANXESS cooperated with a Hebei manufacturer of auto parts to develop the first gearbox side cover made of polyamide 6 (PA6) for the world-renowned SUV and pickup truck manufacturers. Compared with the original metal version (die-cast aluminum cover), the new version greatly improves the integration of different functional features. · Lightweight design solutions have achieved...
view more
-
What is PP gf40?
2021-12-22
That is, original polypropylene resin filling 40% glass fiber to improve the performance of polypropylene. Glass fiber modification is one of the most important ways to enhance modification, and glass fiber modification is also divided into short glass fiber modification, long glass fiber modification and continuous fiber modification. LFT-G company specializes in the production of long glass fibe...
view more
e-mail
English
français
Deutsch
русский
italiano
español
português
العربية
日本語
한국의
中文