-
Inventory of several common Non-Destructive Testing methods for composite materials
2024-03-04
About Composite material is a new material which uses advanced material preparation technology and optimally combines material components with different properties. In the 1940s, due to the needs of the aviation industry, glass fiber reinforced plastics were developed, and the name composite materials has appeared since then. Since the 1950s, high-strength and high-modulus fibers such as carbon fi...
view more
-
Five major carbon fiber reinforced thermoplastic composites
2024-03-04
Polymers are one of the most commonly used and well-known materials of the 21st century. However, pure polymers are not sufficient for use in industries that require great strength and excellent heat resistance. As a result, thermoplastic composites are the preferred materials, and creating these new materials will require overcoming obstacles such as high energy consumption, expensive material co...
view more
-
LFT & SFT
2024-02-29
LFT is the product name for a family of long fiber reinforced thermoplastic materials for Injection Molding, Compression Molding and Extrusion applications. These materials differ from standard thermoplastic compounds in the length of the fiberglass in the pellets. Retention of fiber length in the finished part is key to the performance of LFT. The fiberglass is continuous within the pel...
view more
-
Application and development of thermoplastic composite materials in automobile body structural parts
2024-02-29
Abstract As an important means of transportation, cars play an important role in family travel. At this stage, with the improvement of people's quality of life and the higher pursuit of quality of life, there are new requirements for the performance of cars. In order to meet the needs of the public, automobile companies actively carry out car design and development, and constantly work hard in mat...
view more
-
What is the water resistance of Long Glass Fiber reinforced Polyamide 6 material
2024-02-22
Polyamide 6 is a porous material, and its water resistance is affected by many factors, such as the quality of the material itself, the type and amount of additives, and the way it is treated during processing. In this matter, is the heat resistance of glass fiber reinforced PA6 material excellent? Is glass fiber reinforced PA6 material heat resistant to water? 1. Introduction of PA6 materials Pol...
view more
-
Modified PP plastic materials in the field of home appliances
2024-01-24
HIPS and ABS are the first plastic materials used in household appliances, due to the high price of HIPS and ABS resin, the market has gradually developed PP(polypropylene) modified materials suitable for household appliance parts, and partially replaced HIPS and ABS resin in household appliance products with its advantages of low cost, light weight and good performance. Now the modified PP plasti...
view more
-
ABS Filled Fiber Compounds Performance Explanation
2024-01-24
Glass fiber is a very common material in the chemical industry, often used in the production of reinforced plastics or reinforced rubber. Due to Glass Fiber has high temperature resistance, flame retardant, corrosion resistance, heat insulation, high tensile strength, good insulation characteristics, raw materials after adding glass fiber can significantly improve the heat resistance and mechanica...
view more
-
Polyamide 12 LFT: Benefits and applications
2024-01-16
What is PA12-LCF? PA12-LCF is a thermoplastic material, belonging to the nylon class. PA12-LCF is based on nylon 12, which has 12 carbon atoms in each polymer repeat unit. Nylon 12 is also known as polyamide 12 or PA12. It is a semi-crystalline material with a high melting point (180°C) and a low moisture absorption rate (0.5%). It is also resistant to chemicals, wear and impact. PA12-LCF is a mod...
view more
-
Automotive field long glass fiber reinforced PPA material
2024-01-09
1 Material overview and characteristics PPA, full name polyphthalamide, is a semi-aromatic polyamide with no less than 55% terephthalic acid or phthalic acid as raw material, commonly known as aromatic high temperature nylon. Long-term operating temperature up to 180℃, short-term temperature resistance up to 290℃, with high modulus, high hardness, high cost performance, low water absorption, dimen...
view more
-
PEEK has become a hot trend for lightweight and excellent materials.
2024-01-02
Recently, PEEK material concept stocks continue to ferment. With new energy vehicles, robots, 3D printing and other new downstream requirements for lightweight enhancement, PEEK materials are expected to usher in explosive growth. 1. What is PEEK? PEEK, or polyether ether ketone, is a new semi-crystalline aromatic thermoplastic engineering plastic. Because its molecular chain contains a large numb...
view more