-
The difference between high transparent PP and homopolymer PP
2023-05-11
1. Compare from transparency first Data show that the fog degree of high transparent PP is only 10%, the transmittance of more than 90%, and the fog degree of homopoly PP is 56%, that is to say, the transmittance of homopoly PP is only 44%. 2. From the appearance of glossiness The gloss of high transparent PP is 129.2%, while the gloss of homopolymer PP is only 99.6%. The gloss of high transparent...
view more
-
How can ABS injection molded parts increase brightness?
2023-05-15
I. Injection moulds 1. Poor processing of mold cavity If the mold cavity has scars, microporous, wear, roughness and other deficiencies, it will inevitably react to the plastic parts, so that the plastic parts luster bad, for this, to carefully process the mold, so that the surface of the cavity has a small roughness, if necessary, polishing chrome plating. 2. cavity surface stains If the surface ...
view more
-
Analysis of the performance and application of long glass fiber and short glass fiber modified materials
2023-05-15
About Glass Fiber Glass fiber (or fiberglass) is an inorganic non-metallic materials with excellent performance, a wide range of advantages is good insulation, heat resistance, good corrosion resistance, high mechanical strength, but the disadvantage is the brittle nature, wear resistance is poor. It is made of glass balls or waste glass as raw material by high temperature melting, drawing, yarn, ...
view more
-
Overview of carbon fiber composites in automotive applications
2023-05-23
01 Introduction Carbon fiber composites are high-performance composites made of resin, metal and ceramics as matrix and carbon fiber as reinforcement by advanced composite molding methods. Carbon Fiber Reinforced Polymers (CFRP) is the main material used for automotive applications, which has a series of advantages such as low density, high modulus and high specific strength. Therefore, it is wide...
view more
-
Characteristics, main products, properties and applications of carbon fiber composites
2023-05-30
1. Preface Carbon fiber refers to the high strength and high modulus fiber with carbon content above 90%. The high temperature resistance is the first among all chemical fibers. It is made of acrylic and viscose fiber as raw material and oxidized and carbonized by high temperature. Material characteristics: carbon fiber is mainly composed of carbon elements, with high temperature resistance, anti-...
view more
-
LFT long-fiber reinforced composites in the wave of 5G communication
2023-06-01
The era of 5G communication networks has arrived, and this new technology product has triggered a series of chain reactions: operators, smartphone manufacturers, wireless base station manufacturers, smart chip manufacturers, and high-performance material suppliers, among others, are actively preparing for the battle. Today we understand what applications LFT long-fiber reinforced composites can ha...
view more
-
How to mold long fiber reinforced thermoplastics?
2023-06-07
Long fiber reinforced thermoplastics (LFRT) are being used for injection molding applications with high mechanical properties. While LFRT technology can provide good strength, stiffness and impact properties, the processing method of this material plays an important role in determining what properties can be achieved in the final part. In order to successfully mold LFRTs, an understanding of some ...
view more
-
The difference between Polyamide6 and Polyamide66
2023-06-08
At present, modern design tends to lightweight requirements, the use of plastic proportion is increasing, no matter what industry, as long as the plastic can replace the absolute metal, plastic another advantage is the process of low cost, molding easier. Among the many polymer plastic materials, nylon is the leader, especially in the automotive industry, basically can not be separated from the ny...
view more
-
New choice of environmentally friendly materials - plastic instead of steel lightweight long-fiber reinforced composite materials Q & A
2023-06-27
●What are the benefits of using LFRT materials? Benefits for business owners and factories. a. Plastic instead of steel: In the past, metal was the material of choice for many industrial products because of its high strength and heat resistance, but the disadvantage is that it is not suitable for molding complex shapes. Long glass fiber reinforced material (L.F.R.T) has the most similar performanc...
view more
-
Typical applications of long glass fiber reinforced plastics in the automotive industry
2023-07-04
Long fibre reinforced thermoplastics (LFT) is the most commonly used base resin for LFT, followed by PP, PA and also PBT, PPS, PPA, TPU and other resins. It is worth mentioning that different fibers are needed for different resins to achieve better results. Development of LFT In 1980, Polymer Composites Corporation (PCI), USA, was the first to propose the theoretical design concept of LFT, and con...
view more
-
How to mold long fiber reinforced thermoplastics?
2023-07-17
Xiamen LFT Composite Plastic Co.,LTD was established in 2009, is a brand-name global suppliers of long fiber reinforced thermoplastic materials integrating product research & development（R&D）, production and sale marketing. Our LFT products have passed the ISO9001&16949 system certification and have obtained lots of national trademarks and patents, covering the fields of automotive, mi...
view more
-
A brief look at some of the key factors that make carbon fiber composites a viable alternative to traditional materials
2023-07-20
Nowadays, we find new uses for carbon fiber almost every day. These tiny filaments, which are currently available in a wide variety of functional shapes, have a diameter of one-tenth the thickness of a human hair. The fibers are processed into fabrics that can be used for molding subsequent molding processes and formed into tubes and sheets for construction, or as conventional threads for fiber wi...
view more
e-mail
English
français
Deutsch
русский
italiano
español
português
العربية
日本語
한국의
中文