-
PP Modification Methods Are Generally Divided Into Chemical And Physical Modification
2021-09-13
PP modification methods are generally divided into chemical and physical modification: Chemical modification is cross-linking and grafting on molecular chain.Physical modification is to add some modifiers to get modified plastics. Methods of PP modification: Grafting modification, crosslinking modification, toughening modification, filling modification, strengthening modification The reinforcement...
view more
-
How is long glass reinforced polypropylene ( LGF ) made?
2021-09-26
Long fiber PP modified material is made by impregnation.PP raw resin material is heated and melted, evenly covered on the fiber of different glass fiber content, such as fully impregnated strip after cold water cooling, after the granulator will cut the fiber strip into 6-25mm particle length. Impregnation process can make glass fiber & carbon fiber orderly arrangement, so that the shear parti...
view more
-
Is polypropylene a type of fiberglass?
2021-12-07
First, polypropylene is not a glass fiber. Polypropylene is extracted from petroleum, a semi-crystalline thermoplastic. Has high impact resistance and mechanical properties, resistance to a variety of organic solvents and acid-base corrosion. The glass fiber is an inorganic non-metallic material with many types, good insulation, good corrosion resistance, and high mechanical strength. Polypropylen...
view more
-
What are examples of thermoplastics?
2021-12-10
What are some examples of thermoplastics? 1.PP material Polypropylene is a general-purpose resin closely related to our daily lives. 50% of the world's propylene and 60% of my country's propylene come from polypropylene. It is the fastest growing general-purpose plastic resin in the world, second only to polyethylene and polyvinyl chloride in total. LFT-G blends resin raw materials and long glass ...
view more
-
What is PP gf40?
2021-12-22
That is, original polypropylene resin filling 40% glass fiber to improve the performance of polypropylene. Glass fiber modification is one of the most important ways to enhance modification, and glass fiber modification is also divided into short glass fiber modification, long glass fiber modification and continuous fiber modification. LFT-G company specializes in the production of long glass fibe...
view more
-
Nylon Polymer Application Case
2022-01-17
Polyamide polymers (long fiber modified nylon) are mainly used in the automotive industry as the following components: ①The radiator is a large product made of glass fiber reinforced polyamide. After replacing the original metal material with polyamide, the weight of the product can be greatly reduced. ②The pulley is a product made of glass fiber reinforced polyamide added with graphite. After rep...
view more
-
Long glass fiber PP so many years, are flowing to what application field?
2022-12-01
In recent years, long glass fiber modified PP is extremely popular in the modified plastic industry. Long glass fiber reinforced PP material is cheap, has no less than the excellent performance of reinforced engineering plastics, the combination of these two points show the advantages of high cost performance, is widely favored by the industry. At present, these manufacturers have invested a lot o...
view more
-
[Prosthetics] You know what? There are three main materials for prosthesis receiving cavity
2023-02-17
The thigh prosthesis is composed of a receiving cavity, a knee joint and a connector, among which the receiving cavity is the connecting part of the stump and the prosthesis, and its constituent materials have a great influence on the experience of use. There are three main materials used to make prosthetic chambers: resin, PP sheet and carbon fiber. Each receiving cavity has different characteris...
view more
-
The differences, advantages and disadvantages of PP copolymerization and homopolymerization
2023-02-24
Polypropylene (PP) is divided into homopolymer polypropylene (PP-H), block (impact resistance) copolymer polypropylene (PP-B) and random (random) copolymer polypropylene (PP-R), so what are the advantages and disadvantages of all kinds of PP? I'll share it with you here. 1. Homopolymer polypropylene (PP-H) It is made by polymerization of a single propylene monomer. The molecular chain does not con...
view more
-
Why does Ford use long glass fiber reinforced PP instead of short glass fiber reinforced PP?
2023-03-14
In recent years, long glass fiber modified PP is extremely popular in the modified plastic industry. Long glass fiber reinforced PP material price is low, has the excellent performance no less than reinforced engineering plastics; Comprehensive these two points show the advantage of high cost performance, by the industry is widely optimistic. At present, these manufacturers have invested a lot of ...
view more
-
New choice of environmentally friendly materials-long fiber reinforced composite material Q&A
2023-03-28
● What is long fiber reinforced composite (LFT-G)? The included length of Reinforced fiber is equivalent to the length of plastic particles larger than 6mm thermoplastic. ● What are the benefits of using LFT-G? Benefits for business owners and factories: a. Plastic instead of steel: The past metal material with high strength, heat resistance and other characteristics, is the preferred material for...
view more
-
Discussion on four popular modification of PPS (polyphenylene sulfide) high temperature resistant engineering plastics
2023-03-31
The molecular structure of PPS consists of benzene ring and sulfur atoms interarranged, the configuration is orderly, easy to form a high thermal stability of the crystal structure. At the same time, the molecular structure of PPS material has a highly stable chemical bond characteristics, the benzene ring structure makes PPS more rigid, and the sulfur ether bond (-S-) provides a certain degree of...
view more
e-mail
English
français
Deutsch
русский
italiano
español
português
العربية
日本語
한국의
中文