-
What are examples of thermoplastics?
2021-12-10
What are some examples of thermoplastics? 1.PP material Polypropylene is a general-purpose resin closely related to our daily lives. 50% of the world's propylene and 60% of my country's propylene come from polypropylene. It is the fastest growing general-purpose plastic resin in the world, second only to polyethylene and polyvinyl chloride in total. LFT-G blends resin raw materials and long glass ...
view more
-
Lightweight Replace steel with plastic to make PA6 gearbox cover
2021-12-20
The chemical company LANXESS cooperated with a Hebei manufacturer of auto parts to develop the first gearbox side cover made of polyamide 6 (PA6) for the world-renowned SUV and pickup truck manufacturers. Compared with the original metal version (die-cast aluminum cover), the new version greatly improves the integration of different functional features. · Lightweight design solutions have achieved...
view more
-
What is PP gf40?
2021-12-22
That is, original polypropylene resin filling 40% glass fiber to improve the performance of polypropylene. Glass fiber modification is one of the most important ways to enhance modification, and glass fiber modification is also divided into short glass fiber modification, long glass fiber modification and continuous fiber modification. LFT-G company specializes in the production of long glass fibe...
view more
-
Long glass fiber PP so many years, are flowing to what application field?
2022-12-01
In recent years, long glass fiber modified PP is extremely popular in the modified plastic industry. Long glass fiber reinforced PP material is cheap, has no less than the excellent performance of reinforced engineering plastics, the combination of these two points show the advantages of high cost performance, is widely favored by the industry. At present, these manufacturers have invested a lot o...
view more
-
[Prosthetics] You know what? There are three main materials for prosthesis receiving cavity
2023-02-17
The thigh prosthesis is composed of a receiving cavity, a knee joint and a connector, among which the receiving cavity is the connecting part of the stump and the prosthesis, and its constituent materials have a great influence on the experience of use. There are three main materials used to make prosthetic chambers: resin, PP sheet and carbon fiber. Each receiving cavity has different characteris...
view more
-
The differences, advantages and disadvantages of PP copolymerization and homopolymerization
2023-02-24
Polypropylene (PP) is divided into homopolymer polypropylene (PP-H), block (impact resistance) copolymer polypropylene (PP-B) and random (random) copolymer polypropylene (PP-R), so what are the advantages and disadvantages of all kinds of PP? I'll share it with you here. 1. Homopolymer polypropylene (PP-H) It is made by polymerization of a single propylene monomer. The molecular chain does not con...
view more
-
Polyamide 12 LFT: Benefits and applications
2024-01-16
What is PA12-LCF? PA12-LCF is a thermoplastic material, belonging to the nylon class. PA12-LCF is based on nylon 12, which has 12 carbon atoms in each polymer repeat unit. Nylon 12 is also known as polyamide 12 or PA12. It is a semi-crystalline material with a high melting point (180°C) and a low moisture absorption rate (0.5%). It is also resistant to chemicals, wear and impact. PA12-LCF is a mod...
view more
-
ABS Filled Fiber Compounds Performance Explanation
2024-01-24
Glass fiber is a very common material in the chemical industry, often used in the production of reinforced plastics or reinforced rubber. Due to Glass Fiber has high temperature resistance, flame retardant, corrosion resistance, heat insulation, high tensile strength, good insulation characteristics, raw materials after adding glass fiber can significantly improve the heat resistance and mechanica...
view more
-
Modified PP plastic materials in the field of home appliances
2024-01-24
HIPS and ABS are the first plastic materials used in household appliances, due to the high price of HIPS and ABS resin, the market has gradually developed PP(polypropylene) modified materials suitable for household appliance parts, and partially replaced HIPS and ABS resin in household appliance products with its advantages of low cost, light weight and good performance. Now the modified PP plasti...
view more
-
Why do injection molded parts develop sink marks and dimples?
2024-09-02
(1) Improper control of molding conditions If the injection pressure is too low, the injection and holding time is too short, the injection speed is too slow, the material temperature and mold temperature are too high, the cooling of the plastic part is insufficient, the temperature is too high during demolding, the temperature around the insert is too low, or there is insufficient material supply...
view more
e-mail
English
français
Deutsch
русский
italiano
español
português
العربية
日本語
한국의
中文