Wholesale Best Carbon Fiber Printing Products,Factory Price Carbon Fiber Printing

Blog

Tags

(Ⅱ) How to deal with floating fibers on injection-molded parts? 2024-09-27
Mold temperature too low Cause: If the mold temperature is too low, the melt cools too quickly during flow, causing the glass fibers to not be fully encapsulated by the base resin and float to the surface. Solution: Increase the mold temperature appropriately to ensure the melt has sufficient fluidity to uniformly coat the glass fibers. Regularly check the mold temperature control system to ensure...
view more
Key Factors to Consider Before Using Fiber-filled Compounds 2024-10-07
In the design process of composite materials, a series of important factors must be considered to ensure the performance, safety, and cost-effectiveness of the final product. These factors include material selection, structural design, manufacturing processes, environmental impact, and cost analysis. This article will discuss these key factors in detail and explain their importance in the design o...
view more
Tsinghua University: Study on the Comprehensive Performance and Influencing Factors of Long Glass Fiber Reinforced PA66 Composites 2024-10-22
Introduction Fiber-reinforced polymer composites, due to their lightweight and high-strength characteristics, have found applications in many fields, especially in the transportation sector, where they can effectively reduce vehicle weight and better achieve energy savings and emission reductions. Among them, long glass fiber (LGF) reinforced polyamide materials (PA/LGF) are widely used in the man...
view more
Long Carbon Fiber vs. Short Carbon Fiber in 3D Printing 2024-11-11
In 3D printing, both long carbon fiber and short carbon fiber are used as reinforcement materials to enhance the strength and durability of printed parts. Here’s an overview of their differences: 1. Long Carbon Fiber Long carbon fibers are continuous strands that are incorporated into the printing material. This type of fiber provides superior strength, stiffness, and structural integrity to the p...
- 3D print
- long carbon fiber
- carbon fiber printing
view more
How to increase the gloss of ABS injection-molded products? 2024-11-11
Injection Mold 1. If the mold cavity is poorly machined, with defects such as scratches, micro-pores, wear, or rough surfaces, it will affect the gloss of the plastic part. To address this, ensure precise machining of the mold to achieve a lower surface roughness for the cavity; if necessary, polish and chrome-plate the cavity. 2. If the cavity surface has oil stains, watermarks, or excessive mold...
- Injection molding technicals
- ABS resin
- fiber filled products
view more

first page 1 2 3 4 5 last page

a total of 5 pages

what are you looking for?